Heat transfer from the inner wall of an annulus to subcooled
water in turbulent parallel flow was studied. The inner core of the
annulus consisted of wires varying from 0.0019 to 0.0197 inch in
diameter. The outer tube consisted of a 1.01 inch diameter glass
tube 24 inches long. Diameter...
An experimental study has been made of the local natural convective
heat transfer coefficient around the circumference of a heated
horizontal cylinder oscillating vertically in water. The heat transfer
surface consisted of a 1 3/8-inch diameter cylinder with a small test
section imbedded in its surface. This enabled data to...
An experimental investigation has been performed to determine the
forced convection heat transfer due to three-dimensional air flow over
a flat plate as a function of angle of attack and free stream velocity.
The experimental method employed a transient thermal technique and
placed the convecting surface next to the exhaust...
Natural convection provides a means for circulating fluids without the use of pumps. This type of system is of great interest for a wide variety of applications, including solar heaters, process industry, and nuclear reactors. Natural convection will play a vital role in the area of passive safety and reliability,...
Droplet and spray impingement cooling are typically used in high heat flux
thermal management. In this thesis, droplet impingement and evaporation heat transfer
characteristics are determined from measured spatially- and temporally- varying fluid
and surface temperatures. Unique to this study is the documentation of the effects of
using a nanofluid...
The United States (US) Department of Energy (DOE) has identified the pebble-bed reactor as a high priority for US research with the end goal of licensing a pebble-bed reactor (PBR) for operation in the United States. Before this can be accomplished significant research must be done regarding the safety of...
The Direct Reactor Auxiliary Cooling System (DRACS) is a passive safety system capable of removing decay heat directly from the reactor core. Its modularity makes it scalable for use in reactors with various power levels. Work has previously been completed to support inclusion of the DRACS in liquid metal reactors...
The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
The Boltzmann transport equation derived in the Self-Adjoint Angular Flux (SAAF) formulation is applied to simulate phonon transport. The neutron transport code Rattlesnake is leveraged in this fashion, slightly modi ed to accept input from variables consistent with phonon transport simulations. Several benchmark problems are modeled to assess the potential...
Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...
The research presented in this thesis is a continuation of collaboration between Oregon State University and Auburn University studying the feasibility of passively pumping liquid during boiling in a preferential direction using meso-scaled asymmetric surface patterns. Such a passive phase-change mechanism has great potential for thermal management in spacecraft and...
This thesis discusses the design of several microchannel solar receiver devices for use in CSP (concentrated solar power) using CFD (computational fluid dynamics) simulations. The goal is to demonstrate that, by taking advantage of the higher heat transfer coefficienct of microchannels, solar receivers can achieve higher efficiency than current receiver...
This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...