Index Catalog // ScholarsArchive@OSU

Creator:: Sabo, Michael D.
Abstract:: Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Michael D. Sabo for the

Creator:: Jones, Jacob Aaron
Abstract:: There is an urgent need to lower the concentration of sulfur in diesel fuels. Growing concern over environmental effects caused by burning sulfur-containing diesel has led the world to higher standards in fuel refinement. Because of these lower standards, many techniques have been researched to remove sulfur containing compounds or...
Resource Type:: Masters Thesis
Full Text:: Dibenzothiophene Sulfoxide 78 C HPLC Calibration data for Dibenzothiophene Sulfone 81 D HPLC

Creator:: Anderson, Eric K.
Abstract:: The parallel implementation of a large number of functional units is necessary for any industrial scale microfluidic process. The concept of a 'numbering up' strategy where a single highly optimized functional unit that has a low individual production is replicated a large number of times to create a device that...
Resource Type:: Masters Thesis
Full Text:: made this document possible. Dr. Kevin Drost, Michael Baker, and Dr. Alex Yokochi; their hard work has

Creator:: Hirayama, Michiru
Abstract:: Four types of microchannel reactors were built, using a combination of smallest alumina-tubes commercially available, for testing the feasibility of applying high-temperature microchannel reactors to the ammonolysis of SiO for producing nano-sized silicon nitride powder. The innermost tube used for feeding SiO vapor had an inner diameter (ID) of about...
Resource Type:: Masters Thesis
Full Text:: my study at OSU. Dr. Michael Nesson for his help and advice during the period of this study as

Creator:: Heintz, Keely
Abstract:: The marked increase in surface-to-volume ratio associated with microscale devices for hemodialysis leads to problems with hemocompatibility and blood flow distribution that are more challenging to manage than those encountered at the conventional scale. In this work, stable surface modifications with pendant polyethylene oxide (PEO) chains were produced on polycarbonate...
Resource Type:: Masters Thesis

Creator:: Laddha, Sachin
Abstract:: Micro Powder injection molding (μPIM) is a cost-effective technique for producing small, complex, precision parts in high volumes from ceramic and metal nanoparticles. This study focuses on research conducted on fabrication of Micro Ceramic Arrays (MCAs) parts using μPIM. MCAs are widely used as the major components and design features...
Resource Type:: Masters Thesis
Full Text:: behaviors and potential defect under simulated process conditions. While MCI has strong ability in 3-D

Creator:: Zada, Kyle R.
Abstract:: In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
Resource Type:: Masters Thesis
Full Text:: my labmates, Paul Armatis, Connor Dokken, Matthew Hyder, Tabeel Jacob, Saad Jajja, and Michael

ScholarsArchive@OSU