Diffusion bonding cycle times can be a large cost factor in the production of metal microchannel devices. The challenge is to significantly minimize this cost by reducing the bonding cycle time through rapid and uniform heating and cooling within the bonding process. Heating rates in diffusion bonding processes are typically...
An alumina microreactor was designed and fabricated to study the synthesis of nanosized silicon nitride powder via the ammonolysis of SiO vapor at temperatures ranging from 1300°C to 1400°C. It is the first high temperature ceramic microreactor capable of operating at temperatures upto 1600°C. The microreactor was designed using 3D...
Single-layer and three-layer microchannel adsorption devices were fabricated by procedure that was newly developed. Aluminum was chosen for metal housing while the adsorption pair was silica gel and water. Each adsorption layer contained two layers of 250 μm-thick silica gel. Both silica gel layers opened to the same layer of...
The primary goal of this thesis is to synthesize titanium dioxide nanorods using a continuous flow microreactor. Titania powder, one of the most important particulate materials is used for many purposes owing to its excellent optical properties of a high refractive index leading to high hiding power and whiteness of...
The growth of bdellovibrios at the expense of the host organism involves the catabolism of host cell macromolecular components and the subsequent anabolistic incorporation into bdellovibrio progeny. Extracellular enzymes specific for the various substrates provided by the host cell are present. In this study the extracellular RNase of Bdellovibrio bacteriovorus...
This thesis addresses the issue of comfortable and functional living environments to provide seniors with opportunities for "age in place," that is, living in one's own house after retirement. Such living environments enhance seniors' life satisfaction since the majority of seniors prefer to stay in their own houses and live...
An experimental biomass combustion facility has been
built and established at Oregon State University. The
furnace, or Biomass Combustion Unit ( BCU ), uses an augertype
fuel feed system, grate-type fuel support with under
and over fire air supply.
Fourteen pellet species from five States - Alaska,
Washington, Oregon, Idaho,...
The purpose of this study is to determine if the problem of
scheduling instructors to classes can be formulated as a linear
program involving integer variables limited to values of zero and
one. Once such a formulation is accomplished, attempts at electronic computer solution of the problem are considered.
Specifically,...
The treatability of waters from four log ponds in Oregon by
physical and chemical treatment methods
was investigated.
Treatment processes included sand filtration, activated carbon contact and
coagulation with aluminum sulfate.
Preliminary studies were made at each log pond to determine
the homogeneity of the pond water for sampling
purposes...
The Nearctic species of the genus Sympherobius
Banks are revised. Seventeen species are recorded from
the region. Two new species, S. constrictus and S.
quadricuspis are described from California and Arizona
respectively. Four new specific synonyms are proposed
(junior synonym(s) first): S. brunneus Nakahara and S.
stangei Nakahara = S....