Index Catalog // ScholarsArchive@OSU

Creator:: Bora, Shrenik S.
Abstract:: Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Resource Type:: Masters Thesis
Full Text:: of Master of Science in Wood Science and Civil Engineering presented on September 16, 2020. Title

Creator:: Kirlin, Chad P.
Abstract:: Recently, fiber-reinforced plastics (FRP lamina) have been applied to glued-laminated (glulam) timber for the purpose of improving bending strength and stiffness. Initially, full length reinforcement using FRP lamina was developed. However, the cost of FRP lamina is a significant portion of the total cost of reinforced glulam. Therefore, it is...
Resource Type:: Masters Thesis

Creator:: Larkin, Blake
Abstract:: Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America. CLT products must be certified for structural...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ Lech Muszynski Cross-laminated timber (CLT) is a massive engineered wood product made of

Creator:: Kramer, Anthonie
Abstract:: The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
Resource Type:: Masters Thesis
Full Text:: Engineering and Wood Science presented on March 14, 2014. Title: Cross-Laminated Timber Engineering

Creator:: Blank, Curtis
Abstract:: This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Resource Type:: Masters Thesis
Full Text:: . Title: Performance Based Tests on Cross-Laminated Timber – Concrete Composite Floor Panels

Creator:: King, David
Abstract:: Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
Resource Type:: Masters Thesis
Full Text:: components used to create these composites (oriented strand board, laminated veneer lumber, and solid wood

Creator:: Sullivan, Kyle
Abstract:: The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Resource Type:: Masters Thesis
Full Text:: Wood Science presented on January 6, 2017. Title: Behavior of Cross-Laminated Timber Diaphragm

Creator:: Ferrari, Charles J.
Resource Type:: Masters Thesis
Full Text:: 13. 2000. Title: Life Cycle Assessment: Environmental Modeling of Plywood and Laminated Veneer

ScholarsArchive@OSU