Index Catalog // ScholarsArchive@OSU

Analysis of diagonally cracked conventionally reinforced concrete girders in the service load range

Creator:: Robelo, Melissa J.
Abstract:: Performance evaluation of conventionally reinforced concrete (CRC) bridge superstructure elements with diagonal cracks is of interest to the bridge engineering community. Standardized methods to predict service-level stress magnitudes in cracked bridge girders under combined bending and shear forces are not available. An analysis procedure was developed to determine the response...
Resource Type:: Masters Thesis
Full Text:: : Christopher C. Performance evaluation of conventionally reinforced concrete (CRC) bridge superstructure

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Creator:: Senturk, Ahmet Ekin
Abstract:: Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Resource Type:: Dissertation
Full Text:: Highway Bridge Design Code ………………... 23 2.1.4. Eurocode 2: Design of Concrete Structures

Development of acoustic emissions testing procedures applicable to conventionally reinforced concrete deck girder bridges subjected to diagonal tension cracking

Creator:: Lovejoy, Steven C.
Abstract:: A need exists to develop a non-destructive testing technique that can identify the formation and propagation of diagonal tension cracks in conventionally steel reinforced concrete deck girder (RCDG) highway bridges in the State of Oregon. Such a technique could be included into a structural health monitoring (SHM) system installed on...
Resource Type:: Dissertation
Full Text:: Reinforced Concrete Deck Girder Bridges Subjected to Diagonal Tension Cracking. Abstract approved

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

Creator:: Smith, Matthew T. (Matthew Todd)
Abstract:: Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders. Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Resource Type:: Masters Thesis
Full Text:: contribute to diagonal cracking of bridge components. Epoxy injection is a procedure frequently

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Creator:: Goodall, Joshua K.
Abstract:: Large numbers of vintage reinforced concrete deck-girder bridges remain in the national bridge inventory. Many of these exhibit diagonal cracking and other distress. Due to the design practices of the time, it is common to observe cracks at locations where flexural reinforcing steel is terminated along the span. The presence...
Resource Type:: Masters Thesis
Full Text:: DIAGONAL CRACKS ON NEGATIVE MOMENT FLEXURAL ANCHORAGE PERFORMANCE IN REINFORCED CONCRETE BRIDGE GIRDERS

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis
Full Text:: Strengthening Reinforced Concrete Bridge Girders Using Near-Surface Mounted Titanium Alloy Bars

Shrinkage study of high performance concrete for bridge decks

Creator:: Fu, Tengfei
Abstract:: In the field of civil infrastructure, bridge desks are typically constructed using high performance concrete (HPC). Concrete bridge decks demand qualities such as low permeability, high abrasion resistance, superior durability, and long design life. Over decades of field and laboratory experience, many HPC bridge decks have been found to be...
Resource Type:: Dissertation
Full Text:: SRA; 2) due to the fact that drying shrinkage significantly affects concrete bridge deck cracking

Shear repair methods for conventionally reinforced concrete girders and deep beams

Creator:: Howell, Daniel A.
Abstract:: Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Resource Type:: Dissertation
Full Text:: the concrete. The referenced components may exhibit diagonal cracking due to the initial design

Innovative Strategies to Protect Concrete Bridge Decks and Cross-Laminated Timber Structures through the Use of Impermeable Overlays

Creator:: Haynes, Matthew A.
Abstract:: Bridges are a vital component of transportation infrastructure in the United States, and the continual maintenance and preservation of bridges is critical to maintaining their structural capacity and maximizing service life. One of the most significant issues faced by concrete bridges is the infiltration of moisture from the roadway surface...
Resource Type:: Masters Thesis
Full Text:: : Innovative Strategies to Protect Concrete Bridge Decks and Cross-Laminated Timber Structures through the

Assessing the seismic performance of corroding RC bridge columns

Creator:: Guo, Yisen
Abstract:: Corrosion of reinforcement is recognized as the predominant factor that limits the service life of reinforced concrete (RC) structures exposed to aggressive environments. This corrosion deterioration can lead to damage resulting in capacity loss or even failure. For structures exposed to coastal marine environments or deicing or anti-icing applications, this...
Resource Type:: Masters Thesis
Full Text:: .................................................................................... 20 10. Schematic of corrosion-induced concrete cracking process: (a) thick-wall cylinder model

ScholarsArchive@OSU

Analysis of diagonally cracked conventionally reinforced concrete girders in the service load range

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Development of acoustic emissions testing procedures applicable to conventionally reinforced concrete deck girder bridges subjected to diagonal tension cracking

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Shrinkage study of high performance concrete for bridge decks

Shear repair methods for conventionally reinforced concrete girders and deep beams

Innovative Strategies to Protect Concrete Bridge Decks and Cross-Laminated Timber Structures through the Use of Impermeable Overlays

Assessing the seismic performance of corroding RC bridge columns

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search