Index Catalog // ScholarsArchive@OSU

Design and Shakedown Testing of an Aqueous Dynamic Reference Electrode

Creator:: Brackbill, Anneli
Abstract:: For next-generation molten salt reactors, there is a need to be able to characterize the corrosion of the molten salts contained within them. One such tool that may be used to accomplish this is a dynamic ref- erence electrode, or DRE. Here, an aqueous dynamic reference electrode (aDRE) was developed,...
Resource Type:: Honors College Thesis
Full Text:: Nuclear Science & Engineering Burkan Isgor, Committee Member, representing School of Civil & Construction

Improving the Performance of High Early Strength Concrete by Controlling Self-Desiccation and Mitigating Shrinkage

Creator:: Wilson, Cameron A.
Abstract:: High early strength (HES) concrete is becoming increasingly used to repair damaged concrete pavement sections. The use of HES concrete enables the repaired pavement to be opened to traffic within hours of placing the concrete. A common approach used for the rapid repair of concrete pavement consists of closing a...
Resource Type:: Masters Thesis

High Strength Reinforcing Bars : Concrete Shear Friction Interface Behavior

Creator:: Nielson, Drew R.
Abstract:: Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Resource Type:: Masters Thesis
Full Text:: graduate research assistant. I would also like to thank Dr. Burkan Isgor and Dr. David Myrold for serving

Seismic Performance of Aging Prestressed Transmission Pole with Simulated Soil Foundation

Creator:: Argo, Maximo
Abstract:: The Cascadia Subduction Zone has recently been identified as a source for an impending great earthquake. The potential of a large earthquake has created widespread interest into the resiliency of lifelines within the potentially affected areas. One critical lifeline is the electrical distribution and transmission systems which relies on legacy...
Resource Type:: Masters Thesis
Full Text:: Argo, Author ACKNOWLEDGEMENTS I would like to sincerely thank Dr. Chris Higgins, Dr. Burkan

Influence of transport parameters on the fresh and hardened characteristics of ready-mixed concrete

Creator:: Chen, Jiaming
Abstract:: Most specifications for ready-mix concrete (RMC) limit mixing time to 90 minutes and/or truck drum revolution counts (DRC) to 300 before discharge. These specifications have been in place for many years with the objective of ensuring the quality and performance of the finished concrete product. However, limited research has been...
Resource Type:: Masters Thesis
Full Text:: to thank Dr. Burkan Isgor, Dr. Chris Bell and Dr. Jack Higginbotham for being on my thesis

Seismic performance of reinforced concrete bridge columns constructed with grade 80 reinforcement

Creator:: Link, Tim B.
Abstract:: The research presented in this thesis assessed the use of high strength steel (HSS) reinforcement for use in reinforced concrete (RC) bridge columns. HSS is not currently allowed in reinforced concrete bridge columns due to a lack of information on the material characteristics and performance information when used in RC...
Resource Type:: Masters Thesis
Full Text:: for their continued guidance throughout my project. Also, I would like to thank Dr. Burkan Isgor

Characterization of Oxide Growth of Aluminum Alloy 6061 for Nuclear Research and Test Reactors

Creator:: Wei, Youran
Abstract:: Oxide growth is a common phenomenon on aluminum alloy cladding surfaces in nuclear research and test reactors. Without better understanding of oxide growth, excessive oxide build up on the cladding surface reduces heat transfer capability from fuel to coolant and causes safety concerns due to the potential cladding rupture or...
Resource Type:: Masters Thesis

Generalized Chip Formation and Thermal Dynamics of Modulated Turning

Creator:: Ozdemir, Mert
Abstract:: Modulation assistance is widely employed to improve chip management in turning. This process is also known as modulated turning. Modulated turning transforms continuous cutting into intermittent cutting by periodically disengaging the tool tip from the workpiece, resulting in the generation of short, easily managed chips. This novel method improves the...
Resource Type:: Masters Thesis

In-Situ Confocal Scanning Laser Microscopy and Post-Exposure Analysis of a Cu/Fe-based Oxygen Carrier Material in High-Temperature Oxidation and Reduction Environments for Chemical Looping Combustion Applications

Creator:: Nealley, W. H. Harrison
Abstract:: A Cu/Fe-spinel-based oxygen carrier designed at the National Energy Technology Laboratory was studied in order to characterize its physical and chemical behavior with cyclic oxidation and reduction treatments at 800°C for applications in chemical looping combustions. Observations were made on individual particles of the oxygen carrier in-situ using a confocal...
Resource Type:: Masters Thesis

A Comparison of Formation Factor to Standard Methods to Evaluate Transport Properties

Creator:: Whatley, Samantha N.
Abstract:: Chloride-induced corrosion is one of the primary causes of the degradation of reinforced steel in concrete structures. Currently, the rapid chloride permeability test (RCPT) is the most specified method to determine the concrete’s resistivity to chloride ingress, thus a determining factor in assessing the durability of concrete. While it is...
Resource Type:: Masters Thesis
Full Text:: some of the best professors I could have asked for. Thank you, Dr Burkan Isgor, Dr David Trejo, and

ScholarsArchive@OSU

Design and Shakedown Testing of an Aqueous Dynamic Reference Electrode

Improving the Performance of High Early Strength Concrete by Controlling Self-Desiccation and Mitigating Shrinkage

High Strength Reinforcing Bars : Concrete Shear Friction Interface Behavior

Seismic Performance of Aging Prestressed Transmission Pole with Simulated Soil Foundation

Influence of transport parameters on the fresh and hardened characteristics of ready-mixed concrete

Seismic performance of reinforced concrete bridge columns constructed with grade 80 reinforcement

Characterization of Oxide Growth of Aluminum Alloy 6061 for Nuclear Research and Test Reactors

Generalized Chip Formation and Thermal Dynamics of Modulated Turning

In-Situ Confocal Scanning Laser Microscopy and Post-Exposure Analysis of a Cu/Fe-based Oxygen Carrier Material in High-Temperature Oxidation and Reduction Environments for Chemical Looping Combustion Applications

A Comparison of Formation Factor to Standard Methods to Evaluate Transport Properties

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search