Generally, surveying means gathering and processing information about the physical earth. It’s the science of determining relative positions of existing points on the earth’s surface or of establishing such points. Methods range from aerial and satellite systems to conventional ground methods. Survey professionals use a variety of methods to produce...
Unmanned aircraft systems (UAS), also known as drones, are an increasingly popular method of collecting surveying and mapping data. Two common drone-based mapping techniques are lidar and structure from motion (SfM) photogrammetry, and a frequently-heard (yet nearly impossible to answer) question is: “which is better?” The most common metric for...
Shallow landslides are a prevalent concern in mountainous regions that can result in severe societal, economic, and environmental impacts. The challenge is further compounded as the size and location of a potential slide is often unknown. This study presents a generalized approach for the evaluation of shallow landslide susceptibility using...
During the summer of 1981, Oregon State University archaeologically tested three prehistoric sites on the William L. Finley National Wildlife Refuge. Among the sites tested were typical Willamette Valley floodplain and adjacent upland sites. Most settlement-subsistence pattern models proposed for the Willamette Valley have been generated with data from the...
Small unmanned aircraft systems (UAS) carrying consumer-grade nonmetric cameras are increasingly utilized to generate high-resolution 3D geospatial data. Low cost, ease of operation, widespread availability and low altitude maneuvering capabilities of UAS, as well as the rapid development of technology and methods, make UAS-based photogrammetry applicable to many civil engineering...
This thesis examines prehistoric land use patterns of the entire North Santiam subbasin, located on the western slopes of the Oregon Cascade Range. The objective of this analysis is three-fold: 1) to contribute to reconstructing the cultural chronology of the area; 2) to address the use of raw material by...