Search Constraints

Start Over
Filtering by: Creator Tucker, Julie D. Remove constraint Creator: Tucker, Julie D. Rights Statement In Copyright Remove constraint Rights Statement: In Copyright

Search Results

  • Microstructural Characterization of Porosity in U-Mo Low Enriched Uranium Plate Fuel

    Creator:
    Westman, Bjorn E.
    Abstract:
    New low enriched uranium (LEU) fuels are being developed for replacement of high enriched uranium (HEU) fuels in high power research reactors. U-Mo LEU plate fuels have been identified as a candidate for replacement of current HEU fuels. However, U-Mo fuels tend to exhibit accelerated swelling typically at fission densities...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: ______________________________________________________ Julie D

  • Investigation of Thermal Degradation in Structural Alloys for Nuclear Power Systems

    Creator:
    Teng, Fei
    Abstract:
    The thermal degradation of structural materials is considered to be a key factor for evaluating the lifetime of current nuclear power plants. Ni-based and Fe-based alloys, such as 690, 625, 304, and 316, are widely used in nuclear industry as structural components due to the extraordinary corrosion resistance and mechanical...
    Resource Type:
    Dissertation
    Full Text:
    approved: ______________________________________________________ Julie D. Tucker The thermal

  • Corrosion of Carbon and Stainless Steels in H₂O-sCO₂ Environments for Power Cycle Applications

    Creator:
    Teeter, Lucas
    Abstract:
    The corrosion behaviors of carbon and stainless steels were investigated in supercritical CO₂ (sCO₂ ) containing H₂O and O₂ simulating conditions that exist in direct sCO₂ power cycle heat exchangers. Thermodynamic properties of CO₂-H₂O-O₂ systems related to the corrosion phenomena were determined using NIST software. The exposure tests of the...
    Resource Type:
    Masters Thesis
    Full Text:
    Stainless Steels in H2O-sCO2 Environments for Power Cycle Applications Abstract approved: Julie Tucker

  • Corrosion Resistance of Alloys in Direct-Fired Supercritical CO₂ Power Cycle Aqueous Environments

    Creator:
    Repukaiti, Reyixiati
    Abstract:
    Using supercritical CO₂ (sCO₂) as a working fluid has increasingly gained attention in the energy industry. sCO₂ power cycles has various advantages, such as high cycle efficiency, compact turbomachinery, and potential zero CO₂ emission. Along with these benefits, materials degradation issues have also been emphasized in the last decade. Aqueous...
    Resource Type:
    Dissertation
    Full Text:
    ACKNOWLEDGEMENTS First and foremost, I’d like to sincerely thank my advisor, Dr. Julie Tucker, for taking a

  • Role of Stoichiometry on Ordering in Ni-Cr Alloys

    Creator:
    Teng, Fei
    Abstract:
    Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
    Resource Type:
    Masters Thesis
    Full Text:
    : Role of Stoichiometry on Ordering in Ni-Cr Alloys Abstract approved: Julie D. Tucker

  • Corrosion Resistance of Alloys in Seawater and Supercritical Carbon Dioxide Environments

    Creator:
    Repukaiti, Reyixiati
    Abstract:
    The corrosion resistances of several alloys were investigated to optimize performance and cost in seawater and supercritical CO2 environments. Many alloys are prone to corrosion in seawater and/or supercritical CO2 containing impurity environments. Exposure and electrochemical experiments were conducted in both environments to evaluate alloys’ corrosion resistance. In seawater corrosion...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: ______________________________________________________ Julie Tucker The corrosion

  • Aqueous Corrosion and High Temperature Oxidation in Supercritical Carbon Dioxide Environments

    Creator:
    Teeter, Lucas
    Abstract:
    The corrosion resistance of steels and nickel based alloys was investigated in supercritical CO2 (sCO2). Two types of experiments were conducted. The first set of experiments were conducted in a low temperature aqueous environment to simulate conditions that would exist in direct sCO2 power cycle low temperature heat exchangers. The...
    Resource Type:
    Dissertation
    Full Text:
    : Julie D. Tucker The corrosion resistance of steels and nickel based alloys was investigated in su

  • Prompt gamma neutron activation analysis of niobium for characterization of light interstitials

    Creator:
    Love, Ian J.
    Abstract:
    High purity niobium metal is used in the construction of superconducting radio frequency (SRF) cavities in superconducting particle accelerators, such as the Large Hadron Collider (LHC) at CERN or the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The usual method for characterizing the impurities in this niobium, the...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Julie D. Tucker High purity niobium metal is used in the construction of superconducting

  • Acceleration of Long-Range Ordering in NiCrFe Alloys Via Proton Irradiation

    Creator:
    Evered, Cole E.
    Abstract:
    This work explores the hypothesis that proton irradiation is a feasible alternative to simulate accelerated thermal aging for Ni2Cr long-range ordered phase formation within NiCr and NiCrFe alloys. In this study, various model alloys and commercial alloys 690 and 690+P (0.01 wt.% P) were subject to 2 MeV proton irradiation...
    Resource Type:
    Masters Thesis
    Full Text:
    Irradiation Abstract approved: ______________________________________________________ Julie D

  • Exploring the Ductility Minimum of Niobium C103 at Intermediate Temperatures using Triaxial Tensile Specimens

    Creator:
    Wood, Thomas N., II
    Abstract:
    This work explores the mechanical properties of single-phase niobium alloy C103 from room temperature to 600°C for the purpose of expanding safe uses of the material into new applications. The study utilizes a symmetrically notched triaxial tensile specimens to manipulate the internal stress field in order to observe the changes...
    Resource Type:
    Masters Thesis
    Full Text:
    Julie D. Tucker This work explores the mechanical properties of single-phase niobium alloy C103