Index Catalog // ScholarsArchive@OSU

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis
Full Text:: Aging and deficient infrastructure has become a major problem throughout the world. This is

Creator:: Barker, Laura
Abstract:: Large numbers of reinforced concrete deck girder (RCDG) bridges were built during the highway infrastructure boom of the 1950's. The advent of standardized deformed steel reinforcing bars during this time allowed for straight bar terminations in flexural tension regions. Designers of the time terminated reinforcing bars where they were no...
Resource Type:: Masters Thesis
Full Text:: Flexural Anchorage Performance and Strengthening on Negative

Creator:: Vavra, Eric
Abstract:: Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Resource Type:: Masters Thesis
Full Text:: ability to form mechanical anchorages that are essential characteristics for effective repair and

Creator:: Lostra, Mackenzie M. W.
Abstract:: Large numbers of reinforced concrete (RC) bridges were built in the past that are now considered seismically deficient. The structural members most likely to be considered deficient are the supporting columns. Typical deficient columns contain inadequate transverse reinforcement and poorly detailed lap splice lengths above the foundation. Insufficient lap splice...
Resource Type:: Masters Thesis
Full Text:: columns contain inadequate transverse reinforcement and poorly detailed lap splice lengths above the

Creator:: Johnson, Brandon Ang
Abstract:: Carbon fiber reinforced polymer (CFRP) materials are emerging as an effective means of strengthening and rehabilitating bridges. Near surface mounting (NSM) is a newer technique for application of CFRP for retrofitting of bridge members that provides advantages over conventional strengthening techniques. The technique is still new and uncertainties remain regarding...
Resource Type:: Masters Thesis
Full Text:: : Design and Fatigue Behavior of Near-Surface Mounted CFRP Bars for Shear Strengthening of RC Bridge

Creator:: Keshari, Shweta
Abstract:: This thesis is the consequence of a research effort undertaken by the School of Civil and Construction Engineering at Oregon State University and funded by the Oregon Department of Transportation (ODOT) and the Federal Highway Administration (FHWA). The principal objective of the effort was to reduce the life cycle cost...
Resource Type:: Masters Thesis
Full Text:: Materials and Curing Methods on the Abrasion Resistance and Durability of High Performance Concrete for

ScholarsArchive@OSU