Index Catalog // ScholarsArchive@OSU

Creator:: Kapsenberg, Florian
Abstract:: This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...
Resource Type:: Masters Thesis
Full Text:: : ________________________________________________________________________ Vinod Narayanan This thesis presents a feasibility study of a means to passively effect

Creator:: Mani, Preeti
Abstract:: Characterization of local boiling trends, in addition to the typically reported area-averaged trends, is essential for the robust design and implementation of phase change technologies to sensitive heat transfer applications such as electronics cooling. Obtaining the values of heat fluxes corresponding to locally varying surface temperatures has been a challenge...
Resource Type:: Dissertation
Full Text:: heat fluxes corresponding to locally varying surface temperatures has been a challenge limiting most

Creator:: Zapp, George Michael
Resource Type:: Masters Thesis
Full Text:: around a cylinder normal to an air stream T}fl& ?FCT OF TuaBULNc ON LOCAL D'AT WN3F? COFFIC FNTS

Creator:: Goshayeshi, Ali
Abstract:: An experimental study is described in which time-average local heat transfer coefficients were obtained for arrays of horizontal tubes immersed in a hot fluidized bed. Spatial-averaged heat transfer coefficients, computed from local values, are also reported. Refractory particles with surface mean diameters of 2.14 mm and 3.23 mm were fluidized...
Resource Type:: Dissertation
Full Text:: horizontal tubes immersed in a high-temerature fluidized bed AN ABSTRACT OF THE THESIS OF Ali Goshayeshi

Creator:: Wang, Hailei
Abstract:: A unique channel surface enhancement technique via diffusion-bonding a layer of conductive fine wire mesh onto the heating wall was developed and used to experimentally study flow boiling enhancement in parallel microchannels. Each channel was 1000 μm wide and 510 μm high. A dielectric working fluid, HFE 7000, was used...
Resource Type:: Dissertation
Full Text:: . Abstract approved: A unique channel surface enhancement technique via diffusion-bonding a layer of

Creator:: Graber, Christof
Abstract:: Droplet and spray impingement cooling are typically used in high heat flux thermal management. In this thesis, droplet impingement and evaporation heat transfer characteristics are determined from measured spatially- and temporally- varying fluid and surface temperatures. Unique to this study is the documentation of the effects of using a nanofluid...
Resource Type:: Masters Thesis
Full Text:: . Unique to this study is the documentation of the effects of using a nanofluid and a nano-structured

Creator:: Hong, Seung-Ho
Abstract:: Heat transfer and fluid mechanical behavior of water flowing horizontally in vertically-narrow rectangular channels was studied in this work. Friction factor and Nusselt number variations were determined experimentally for four different wall heating conditions, and for aspect ratios(height to width) of 5, 4, 3, 2, and 1. Wall heating conditions...
Resource Type:: Dissertation
Full Text:: convection was the result of buoyancy-induced secondary flows. Local Nusselt numbers decreased in a manner

ScholarsArchive@OSU