An experimental investigation was conducted for natural convection
heat transfer in an array of uniformly heated vertical cylinders
in mercury. The test section consisted of seven electrically heated
cylinders of 1.365 inch diameter and 3.825 inch heated length
arranged in an equilateral triangular pattern. In order to preclude
side flow...
The present study proposes to investigate the flow structure of different arrays of jets impinging on a flat surface enclosed by three walls, creating a channel that forces the air to leave in one preferential direction, generating a self sustain crossflow. Details of both the mean and some turbulence quantities...
A study was conducted to determine the heat transfer characteristics
of pin finned heat sinks in natural convection. Three pin
diameters were studied: 0.238 cm, 0.318 cm and 0.396 cm. The pins
were attached to the base in two arrangements, triangular and
rectangular, forming a horizontal array. Pin spacing was...
Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
A steady gas convection model of heat transfer to a horizontal
cylinder immersed in a gas fluidized bed is presented. Contributions due to flow within
attached bubbles as well as the interstitial voids are
included. The interstitial flow is approximated as flow within a series
of double cusped channels and...
This thesis is concerned with the analysis of heat transfer in a tube with forced flow under conditions of an arbitrary variation of wall heat flux both axially and circumferentially. This total study is separated into two distinct problems which are presented separately. The first is the case of a...
The metastable isotope of technetium-99 (Tc-99m) is an important diagnostic tool used in the field of nuclear medicine due to the isotope's 6.0 hour half-life, 140.5 keV γ-decay mechanism, and multiple oxidation states [1,2]. Approximately 70% of the world’s nuclear medicine procedures involve the use of Tc-99m [3]. The conventional...