Index Catalog // ScholarsArchive@OSU

Engineering calculations of momentum, heat, and mass transfer through laminar boundary layers

Creator:: Oregon State University. Engineering Experiment Station, Elzy, E., 1940-, and Myers, Gary Allen
Resource Type:: Technical Report
Full Text:: 19o8 Engineering Calculations of Momentum, Heat and Mass Transfer Through Laminar Boundaries E

Heat transfer during the piston-cylinder expansion of a gas

Creator:: Rodrigues, Matthew Jose
Abstract:: The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
Resource Type:: Masters Thesis
Full Text:: APPROVED: Major Professor, representing Mechanical Engineering Head of the

Effects of orifice geometry and surface boundary condition on heat transfer of impinging jet array

Creator:: Kanokjaruvijit, Koonlaya.
Abstract:: The effects of the orifice geometry and the surface boundary condition on the heat transfer distribution to a flat surface of an impinging jet array were investigated. The jet array impinged normally onto the surface which was either isothermal or had a uniform heat flux. The experiments were performed for...
Resource Type:: Masters Thesis
Full Text:: @ for the degree of Master of Science in Mechanical Engineering presented on February 16, 2000. Title

Flow characteristics of semi-confined impinging jet arrays

Creator:: Dano, Bertrand P. E.
Abstract:: The present study proposes to investigate the flow structure of different arrays of jets impinging on a flat surface enclosed by three walls, creating a channel that forces the air to leave in one preferential direction, generating a self sustain crossflow. Details of both the mean and some turbulence quantities...
Resource Type:: Masters Thesis
Full Text:: Engineering presented on October 12, 2000. Title: Flow Characteristics of Semi-confined Impinging Jet Arrays

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

Creator:: Aktan, Gülçin
Abstract:: The problem of heat transfer due to free convection in a channel formed by two parallel, isoflux, vertical plates is of considerable importance in electronic cooling applications, thermosiphons, the optimum spacing of plates or components, industrial stacks, heat exchangers, nuclear power plants and combustion involving vertical walls. Although in each...
Resource Type:: Masters Thesis
Full Text:: Master of Science in Mechanical Engineering presented on May 6, 1996. Title: Fully Developed Laminar

Synthesis of colloidal metal oxide nanocrystals and nanostructured surfaces using a continuous flow microreactor system and their applications in two-phase boiling heat transfer

Creator:: Choi, Chang-Ho
Abstract:: Metal oxide nanocrystals have attracted significant interests due to their unique chemical, physical, and electrical properties which depend on their size and structure. In this study, a continuous flow microreactor system was employed to synthesize metal oxide nanocrystals in aqueous solution. Assembly of nanocrystals is considered one of the most...
Resource Type:: Dissertation
Full Text:: Engineering presented on March 4, 2013. Title: Synthesis of Colloidal Metal Oxide Nanocrystals and

An experimental study of fluid flow and heat transfer in rectangular microchannels

Creator:: Popescu, Aristotel
Resource Type:: Dissertation
Full Text:: Philosophy in Mechanical Engineering presented on November 30, 2000. Title : An Experimental Study of Fluid

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Creator:: He, Xiaoliang
Abstract:: With continued development of the electronic industry, the demand for highly efficient heat removal solutions requires innovative cooling technologies. A computational fluid dynamic (CFD) study, including heat transfer, is performed for an axisymmetric, confined jet impingement experiencing boiling and coupled with vapor extraction. Boiling occurs at the target surface while...
Resource Type:: Masters Thesis
Full Text:: Engineering presented on January 4, 2013 Title: CFD Simulation of Single-Phase and Flow Boiling in

Fully developed laminar natural convection in a vertical parallel plate channel with symmetric uniform wall temperature

Creator:: Willie, Robert H.
Abstract:: Described in this thesis is an investigation of the fully developed natural convection heat transfer in a vertical channel formed by two infinitely wide parallel plates maintained at a uniform wall temperature. Closed-form solutions for the velocity and temperature profiles are developed along with local and averaged Nusselt numbers. The...
Resource Type:: Masters Thesis
Full Text:: . Willie for the degree of Master of Science in Mechanical Engineering presented on June 7, 1996. Title

Development of a process for fabricating high-aspect-ratio, meso-scale geometries in stainless steel

Creator:: Walker, Benjamin A.
Abstract:: Miniature energy and chemical systems (MECS) are miniature thermal, fluid, and chemical devices in the mesoscale size range between a sugar cube and a human fist. MECS take advantage of improved rates of mass and heat transfer that have been observed at the microscale. There are many potential applications for...
Resource Type:: Masters Thesis
Full Text:: degree of Master of Science in Industrial Engineering presented on May 5, 1998. Title: Development of a

ScholarsArchive@OSU

Engineering calculations of momentum, heat, and mass transfer through laminar boundary layers

Heat transfer during the piston-cylinder expansion of a gas

Effects of orifice geometry and surface boundary condition on heat transfer of impinging jet array

Flow characteristics of semi-confined impinging jet arrays

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

Synthesis of colloidal metal oxide nanocrystals and nanostructured surfaces using a continuous flow microreactor system and their applications in two-phase boiling heat transfer

An experimental study of fluid flow and heat transfer in rectangular microchannels

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Fully developed laminar natural convection in a vertical parallel plate channel with symmetric uniform wall temperature

Development of a process for fabricating high-aspect-ratio, meso-scale geometries in stainless steel

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search