Index Catalog // ScholarsArchive@OSU

An experimental study of natural convection in air between a vertical isothermal flat plate and a parallel insulted flat plate

Creator:: Lee, Soon Mo
Abstract:: The free convective heat transfer phenomena in air between two vertical plates 24 by 38 inches spaced 15.895 mm apart, was investigated in this experimental study. One plate was isothermal and, the other adiabatic. A quartz fiber anomometer was used for measuring local velocities in the air between the vertical...
Resource Type:: Masters Thesis
Full Text:: SOON MO LEE for the MASTER OF SCIENCE (Name) (Degree) in MECHANICAL ENGINEERING presented on -',{V1

Local shell-side heat transfer coefficients and pressure drop in a tubular heat exchanger with orifice baffles

Creator:: Lee, Kyu Sung
Resource Type:: Masters Thesis
Full Text:: PRESSURE DROP IN A TUBULAR HEAT EXCHANGER VITh ORIFICE BAFFLES br KYU SUNG LEE A THESIS submitted

Heat transfer characteristics of liquid-liquid dispersions flowing in an annulus

Creator:: Corlett, Thomas Lee
Resource Type:: Masters Thesis
Full Text:: dispersions flowing in an annulus AN ABSTRACT OF THE THESIS OF THOMAS LEE CORLETT for the degree MASTER OF

Heat transfer in fluidized systems

Creator:: Levenspiel, Octave
Resource Type:: Masters Thesis
Full Text:: Graduate School A CKNOWLEDGMENT Appreeiatio is ratefuI1y expressed to Professor J. S. Wa1tor, Head

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

Creator:: Aktan, Gülçin
Abstract:: The problem of heat transfer due to free convection in a channel formed by two parallel, isoflux, vertical plates is of considerable importance in electronic cooling applications, thermosiphons, the optimum spacing of plates or components, industrial stacks, heat exchangers, nuclear power plants and combustion involving vertical walls. Although in each...
Resource Type:: Masters Thesis
Full Text:: professors Dr. John Lee, Dr. Lorin Davis and Dr. Daniel Farkas for serving on my committee. I am very

Natural Convection Heat Transfer and Boundary Layer Transition for Vertical Heated Cylinders

Creator:: Goodrich, Sam S.
Abstract:: In recent years, the global nuclear industry has placed a greater emphasis on passively safe reactor designs. In particular, much attention and design work has been applied to engineered systems for passive cooling of nuclear fuel, whether it be loaded in a core or stored in spent fuel pools. The...
Resource Type:: Dissertation
Full Text:: OF THE DISSERTATION OF Sam S. Goodrich for the degree of Doctor of Philosophy in Nuclear

An experimental study of fluid flow and heat transfer in rectangular microchannels

Creator:: Popescu, Aristotel
Resource Type:: Dissertation
Full Text:: committee, John Lee, Richard Peterson, Deborah Pence and Erik Skyllingstad, who provided insightful

Experimental studies of heat transfer with an array of horizontal tubes immersed in a high-temerature fluidized bed

Creator:: Goshayeshi, Ali
Abstract:: An experimental study is described in which time-average local heat transfer coefficients were obtained for arrays of horizontal tubes immersed in a hot fluidized bed. Spatial-averaged heat transfer coefficients, computed from local values, are also reported. Refractory particles with surface mean diameters of 2.14 mm and 3.23 mm were fluidized...
Resource Type:: Dissertation
Full Text:: tubes were affected the most due to the presence of the lee stack. For spatially averaged values, a

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Creator:: Kapsenberg, Florian
Abstract:: This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...
Resource Type:: Masters Thesis
Full Text:: parallel to the surface were shown to be in excess of 600 mm/s immediately following departure, and

Effects of orifice geometry and surface boundary condition on heat transfer of impinging jet array

Creator:: Kanokjaruvijit, Koonlaya.
Abstract:: The effects of the orifice geometry and the surface boundary condition on the heat transfer distribution to a flat surface of an impinging jet array were investigated. The jet array impinged normally onto the surface which was either isothermal or had a uniform heat flux. The experiments were performed for...
Resource Type:: Masters Thesis
Full Text:: heat flux. The experiments were performed for the flow rate range from 0.0039 to 0.0070 m3/s

ScholarsArchive@OSU

An experimental study of natural convection in air between a vertical isothermal flat plate and a parallel insulted flat plate

Local shell-side heat transfer coefficients and pressure drop in a tubular heat exchanger with orifice baffles

Heat transfer characteristics of liquid-liquid dispersions flowing in an annulus

Heat transfer in fluidized systems

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

Natural Convection Heat Transfer and Boundary Layer Transition for Vertical Heated Cylinders

An experimental study of fluid flow and heat transfer in rectangular microchannels

Experimental studies of heat transfer with an array of horizontal tubes immersed in a high-temerature fluidized bed

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Effects of orifice geometry and surface boundary condition on heat transfer of impinging jet array

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search