Index Catalog // ScholarsArchive@OSU

Simply supported sandwich beam : a nonlinear theory

Creator:: Forest Products Laboratory (U.S.) and Zahn, John J.
Resource Type:: Technical Report
Full Text:: mathematical analysis are in the Appendix. Formula numbers ending in A refer to the appendix. 4—Underlined

Development of an ACIP pile-specific load-displacement model

Creator:: Adami, Nasim
Abstract:: Augered cast-in-place piles, also known as ACIP piles, have been used for more than seven decades in the United States and have gained in popularity due to their relatively quick installation and cost-effectiveness. Owing to the reduced impact on the neighboring environment as compared to some other deep foundation installation...
Resource Type:: Masters Thesis
Full Text:: Development of an ACIP Pile-Specific Load-Displacement Model

Stresses induced in a sandwich panel by load applied at an insert

Creator:: Youngquist, W. G., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Original report issued March 1955.
Resource Type:: Technical Report

Transfer of longitudinal load from one facing of a sandwich panel to the other by means of shear in the core

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, and Boller, Kenneth H.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued April 1955.
Resource Type:: Technical Report
Full Text:: the construction is changed or at the edge of the panel. A mathematical analysis is given and verified

Critical loads of a rectangular, flat sandwich panel subjected to two direct loads combined with a shear load

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, and Kommers, William J.
Abstract:: Information reviewed and reaffirmed 1958. Original report issued June 1952.
Resource Type:: Technical Report
Full Text:: = Discussion of Mathematical Analysis When a sandwich panel is subjected to a combination of edgewise loads

Supplement to deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate : experimental verification of theory

Creator:: Lewis, Wayne C., 1914- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued December 1956.
Resource Type:: Technical Report
Full Text:: veri- fication of the mathematical derivations presented in Report 1847. Panels 20 by 20 and 20 by 30

Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

Creator:: Forest Products Laboratory (U.S.) and Raville, Milton E.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed September 1962. Original report dated December 1955.
Resource Type:: Technical Report

The bending of a circular sandwich plate under normal load

Creator:: Ericksen, Wilhelm S. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Revised June 1953.
Resource Type:: Technical Report
Full Text:: , G. N. Modern Analysis. New York. 1945. ?V, Kirma,n, Theodore, and Blot, Maurice A. Mathematical

Practical modeling for load paths in a realistic, light-frame wood house

Creator:: Pfretzschner, Kathryn S.
Abstract:: The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
Resource Type:: Masters Thesis
Full Text:: were validated against full-scale tests on sub- assemblies and an L-shaped house. The model of the L

Light-frame versus timber frame : a study in quantifying the differences

Creator:: Malone, Brian P.
Abstract:: The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
Resource Type:: Masters Thesis
Full Text:: ................................ 168 Appendix I: SAP2000 Model Material and Section Properties

ScholarsArchive@OSU

Simply supported sandwich beam : a nonlinear theory

Development of an ACIP pile-specific load-displacement model

Stresses induced in a sandwich panel by load applied at an insert

Transfer of longitudinal load from one facing of a sandwich panel to the other by means of shear in the core

Critical loads of a rectangular, flat sandwich panel subjected to two direct loads combined with a shear load

Supplement to deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate : experimental verification of theory

Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

The bending of a circular sandwich plate under normal load

Practical modeling for load paths in a realistic, light-frame wood house

Light-frame versus timber frame : a study in quantifying the differences

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search