The drift velocity of electrons in pure hydrogen, in pure deuterium, and in mixtures thereof, has been observed at low pressures using the following pulse technique for these gases for the first time. Plane parallel electrodes of a known separation and immersed in the gas to be studied are connected...
A configuration-interaction determination of wave
functions has been made for the ²S and ²P states of lithium,
and for the ¹S and ³S states of the lithium ion.
Two 1s, one 2s, one 3s, and two 2p functions served as
starting functions for all four states. Results of the
total...
The energy distribution of electrons in Townsend discharges in
helium has been experimentally investigated in a direct fashion.
A discharge is initiated between parallel plates of a small cell
mounted at the center of a spherical retarding field energy analyzer.
The anode of the cell is perforated and some electrons...
A knowledge of the time rates for intermediate reactions
during the photolysis of nitrogen dioxide enables one to deduce the
possible intermediate reactions which are responsible. An experiment has been devised and constructed which will measure the time
rates for photochemical reactions occurring in ranges of one micro
second to...
In this work the electron energy distribution functions and the
anisotropic drift term of the velocity distribution functions in non-self-sustaining
(Townsend) discharges in argon were determined by
direct measurement for a range of E/N (electric field strength by
gas atom concentration) from 70 to 407 Townsends (Td). (One Td
equals...
The three-body heterogeneous and wall recombination coefficients for atomic oxygen were measured using an electron paramagnetic
resonance spectrometer to monitor the time dependence of the
atomic oxygen concentration. This measurement was made for a
pressure range of from .224 to 1.10 torr using pyrolysis of ozone as
a source of...
When pavement markings on roadways are removed, scarring can occur leaving behind traces of where the marking used to be called ghost lines. These ghost lines can confuse drivers on the roadway and divert their attention from the correct lane markings leading them into the false lane. Previous research has...
Creating schedules for the job shop manufacturing system is an extremely difficult task. Although researchers have devoted a lot of attention to generating optimal solutions, these solutions are static, thus they do not update as random events occur that disrupt the system. As smart manufacturing has grown, researchers have been...
The Manual on Uniform Traffic Control Devices prohibits positioning a bike lane right-adjacent to a vehicle turn-only lane to mitigate the potential for right-hook crashes. However, it provides no specific guidance on positioning with respect to bus-only lanes. This thesis describes a before/after safety evaluation of bike lanes positioned left...
Previous research has found some bicyclists disregard circular red indications and stop signs. Possible justifications include a desire to increase safety, save energy, save time, and increase visibility. Because of this, many bicyclists feel as though stopping at stop signs, especially in the absence of conflicting vehicular traffic, is an...
As e-commerce and urban deliveries spike, there is an increasing demand for curbside loading/unloading space. However, commercial vehicle drivers face numerous challenges while navigating dense urban road networks. Previous literature on the topic of how commercial vehicle drivers make choices about when and where to park is scarce, and data...
It is considered best practice when designing pedestrian access at intersections to provide two curb ramps at each street corner. In Oregon, there are many locations where long ramp runs cause curb ramps to be set back a significant distance from the apex of the intersection corner to meet this...
In discrete event simulation, probability distributions are used as models of various unpredictable system components. The times between equipment failures and job processing times are examples of such random system components. The commonly recommended and taught practice for selecting a probability distribution to represent a random component is a multistep...
In high volume automated discrete item batch production systems, the batches or lots are typically fixed quantity (i.e., size), with setups incurred between the different production lots. Processing times for the fixed-size lots are relatively constant when the workstation is operating however, random workstation disruptions cause variability in the lot...
Bicyclist safety at urban intersections is a critical element for encouraging an increase in bicycle commuting. With bicycle injury and fatality rates rising due to collisions with vehicles at signalized intersections, increasing the safety of riders continues to be an important consideration when promoting this mode of transportation. Previous research...
The variability introduced into measurements by a measuring instrument is referred to as measurement instrument precision. Experimental procedures and analysis methods exist when measurements are repeatable and can be repeated on the same item. However, when the measurements are destructive and repeated measurements are not possible, estimating measuring instrument precision...
Intersections pose unique transportation challenges regarding safety and operational efficiency. When pedestrians currently want to cross at intersection, they need to use a push button to issue a call for service. The call is static and cannot be altered or changed. But by implementing dynamic passive pedestrian detection sensors, intersections...