A need exists to develop a non-destructive testing technique that can identify
the formation and propagation of diagonal tension cracks in conventionally
steel reinforced concrete deck girder (RCDG) highway bridges in the State of
Oregon. Such a technique could be included into a structural health
monitoring (SHM) system installed on...
Capacity of transverse 1950's vintage reinforced concrete deck girder bridge bent caps with large straight bar anchorages were investigated and evaluated. Eleven subassemblage column specimens were examined with different anchorage lengths, bar groupings, amount of transverse steel, and externally applied axial force. Test results showed an increase in anchorage capacity...
Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders.
Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Oregon Department of Transportation’s bridge no. 9743b is a multi-span, two-girder steel deck bridge connecting the busy interstates 5 and 205. Vertical cracks have been detected in the welded girder-to-crossbeam connections at the bents. Distortion-induced fatigue is suspected to be responsible for the cracking. Linear elastic beam analysis, 2-D and...
In recent years confinement requirements for concrete columns have increased in seismic regions. Steel jackets are one way to confine reinforced concrete columns. The increased confinement provides additional strength and ductility for the columns during seismic events. For reinforced concrete columns with steel jackets, there are different section properties in...
Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened
with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
The experimental setup and data are presented for a laboratory experiment conducted to examine realistic wave forcing on a highway bridge superstructure. The experiments measure wave conditions along with the resulting forces, pressures, and structural response of a 1:5 scale, reinforced concrete model of a typical section of the I-10...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged environmental exposure and combined...