Environmental concerns have renewed the interest in electric vehicles. To gain
widespread use, electric vehicles will also have to offer good performance and be
reasonably priced. AC drive systems using modern semiconductors can provide
efficient operation at the required power levels, but their cost at present is still too
high....
This research introduces an energy storage system to deliver microgrid frequency response. A doubly-fed induction generator (DFIG) and a squirrel cage induction machine (SCIM) are coupled together as a motor/generator set to deliver an immediate inertial response to a change of frequency, and an inverter and supercapacitors deliver short term...
The three-phase squirrel-cage induction motor is rugged, compact,
inexpensive, can be totally enclosed and requires little maintenance.
Its use as a variable speed drive has been limited, however, by the
state-of-the art of control components.
The advent and continuing development of the silicon controlled
rectifier and associated solid-state components has...
The effect of the mutual inductances between the rotor coils of a synchronous machine on its defined reactances and predicted transients are investigated. Two linearized models of the machine are considered. One uses the Laplace-Transform approach, with minimum number of assumptions on the inter-coil couplings, in developing a model for...
Traditionally linear actuator applications are addressed by the use of hydraulic systems. The high maintenance cost and poor reliability will always be the most critical problem in the real applications. Benefited from both the high mechanical advantage of the roll screw and the simple structure of the switched reluctance motor,...
Use of conventional induction machines (IM) in adjustable
speed drives (ASD) has increased in recent years. Electronic
power processing has facilitated this increased use. The IM
is an inexpensive and robust machine, but when used as part of
an ASD, the cost of the system increases due to the inclusion...
A model of a squirrel cage induction machine, d.c.-
link power supply and centrifugal pump is developed and
used in the design and evaluation of a perturbation feedback
control system for a sewage pumping station. A comparison
of the simulation model of the induction machine
and a laboratory machine to...
This thesis introduces a Brushless Doubly-Fed Machine (BDFM), stand-alone
generator system. Development of a BDFM current-forced model, along with the
analysis of air gap power distribution between the two stator windings and the rotor
circuit, pave the way for the characterization and analysis of stand-alone generator
systems.
The main disadvantage...
This thesis presents the development of a supervisory controller for a pre-commercial
Brushless Doubly-Fed Machine (BDFM) drive system. In addition,
characterizations of new diecast rotors for the BDFM are presented. Using the
characterization results from the new rotors, a control scheme was developed to allow a
BDFM to be packaged...
The Motor Systems Resource Facility (MSRF) at Oregon State University presently conducts a variety of steady state tests on Motors and Generators, with ratings of upto 300Hp.(225kW), using a dynamometer. The dynamometer consists of an induction motor fed by a power electronic converter. A control computer uses a serial link,...