This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
......................................................................................................... 4
Literature Review………………………………………………………………………….5 2
2.1 Full Scale Testing of Timber-Concrete
In 1987, Congress authorized a 5 year $150 million dollar research program called
the Strategic Highway Research Program (SHRP). SHRP was divided into four major
areas, including the asphalt research program. The asphalt research program was divided
into six major research contracts, one such contract, SHRP-003A was called Performance
Related...
Testing of asphalt binders and asphalt-aggregate mixtures using dynamic
mechanical analysis is becoming popular with improvements in high-speed
computers, precision equipment, and computer software. Researchers are trying
to describe the behavior of asphalt binders and asphalt-aggregate mixtures in
terms of their time- and temperature-dependent linear viscoelastic behavior.
The objectives of...
This paper investigates a particular bridge construction technique
which could result in a significant torsional moment. The
structural member under consideration is a prestressed concrete
girder for which no torsional consideration is made.
Torsional shear stresses can be adequately approximated for
an I-shaped girder. Laboratory model tests were performed to...
Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines performance of common anchorage connection details for AASHTO Type III prestressed concrete girders used by some transportation agencies. Full-scale specimens were fabricated and tested...
Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Capacity of transverse 1950's vintage reinforced concrete deck girder bridge bent caps with large straight bar anchorages were investigated and evaluated. Eleven subassemblage column specimens were examined with different anchorage lengths, bar groupings, amount of transverse steel, and externally applied axial force. Test results showed an increase in anchorage capacity...
Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Increasing load magnitudes and loss of reinforcing steel cross-sectional area from corrosion creates the potential for low-cycle fatigue (LCF) in conventionally reinforced concrete (CRC) bridge girders lightly reinforced for shear. LCF of reinforcing steel may be of particular concern. Little data are available for LCF of reinforcing steel without stress...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...