The advantages of high-temperature drying are faster drying, reduced inventory, reduced energy requirements, and reduced equilibrium moisture content. However the disadvantages are higher initial costs of the kiln, greater power needs, knot dropout, and reduction in some strength properties. The latter was the subject of this study. Three hundred pieces...
It is difficult to treat the heartwood of many wood species with liquid preservatives using conventional liquid processes. Supercritical fluids (SCF) used as carriers of preservatives to impregnate refractory wood species may be an attractive alternative to conventional liquid carriers. While SCF impregnation has many potential advantages, some wood species...
An experiment in 199 m of water on the Oregon shelf produced continuous current speed profiles
down to the sediment-water interface. These profiles show that the velocity structure above the
viscous sublayer is consistent with that expected when form drag influences the boundary layer flow.
They show two logarithmic-profile regions,...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
Over the last decade the world has seen three major tsunamis strike the coasts of
Indonesia, Samoa, and Chile. These tsunamis have caused significant losses of life and
property on the coastal cities of these and nearby countries. The NEES (Network for
Earthquake Engineering Simulation) Housesmash project was created to...
Wildfire prevention operations like forest thinning and forest fuel removal result in large volumes of woody biomass available for utilization. In 2007 alone, the US federal government spent nearly $2 billion to fight forest fires on federal lands. Annually, the USDA Forest Service spends $1 billion to thin young trees...
The objective of this study was to determine the effect of misplaced hold-downs
on the static and cyclic behavior of wood shear walls. Three shear wall
configurations were considered in this study. The first configuration (control) had
hold-downs at the ends of the wall (wall type 1), the second configuration...
The objectives of this study are: (1) to evaluate the effect of reference
displacement on wall behavior under fully reversed cyclic loading using the
CUREE test protocol and (2) to assess damage accumulation (visible fastener
damage and stiffness degradation) for the imposed drift levels. All tests were
conducted on identical...
Torsion test was evaluated as a method to determine the shear strength
parallel to grain of full-size structural composite lumber (SCL). Experimental
results of eighty-five rectangular (44 x 140 mm²) specimens were verified by finite
element analysis. Laminated strand lumber (LSL), laminated veneer lumber
(LVL) and parallel strand lumber (PSL)...