Porous media flows are encountered in many natural and man-made systems such as gas adsorption, filtration, heat exchangers, combustion, catalytic reactors and groundwater hydrology. This study experimentally investigates these flows as function of pore Reynolds number, Re[subscript pore]. The pore Reynolds number is based on the porous bed hydraulic diameter,...
Aerosols are tiny particles that serve as nuclei for cloud droplet and ice crystal formation. Increases in aerosol concentration lead to clouds with smaller but more numerous droplets. Some recent studies have found evidence that ice crystal size in deep convective clouds is also reduced by elevated aerosol concentrations. In...
An experimental investigation into the behavior of micro-bubbles flowing
through a micro-channel has been conducted. Experiments were performed within a
rectangular micro-channel with dimensions of 5 cm x 13.2 mm x l30 jim. Bubbles
were generated in an electrolyte solution by electrolysis at the lower channel wall near
the inlet....
As drop-on-demand (DOD) applications continue to gain ground in desktop inkjet-printing, 3D printing, fluid mixing, and other areas the demand for higher frequency operations are beginning to push against the current physical boundaries in DOD technology. The current research is exploring the possibility of controlling drop volume and velocity at...
The droplet formation process in the vicinity of the nozzle exit and the behavior of a spreading droplet during impingement on a smooth glass surface were studied. Two nozzle geometries were tested. The first case was a stiff stainless steel nozzle plate 0.787 mm thick. The second case was a...
:
_____________________________________________________________________
JamesA. Liburdy
The droplet formation process in the vicinity of the nozzle exit and the
The characteristics of the free surface in an orifice driven by a periodic forcing function have been studied both theoretically and experimentally. In the theoretical study, two wall boundary condition cases were examined: 1) the radial velocity at the wall of the orifice is zero; and 2) the axial velocity...
This project explored the feasibility of using fungi in a constructed wetland
for the treatment of pulp mill effluent. The effluent is high in dissolved
lignins (some of which are chlorinated), which have proven very difficult to
degrade biologically. Mindful of work done with the (terrestrial) white rot
fungi, especially...
Based on experimental investigations the present study evaluates flow instability and
void fraction in a fractal-like branching microchannel network with rectangular cross-section. The hydraulic diameter of the channels ranged from 308μm at the inlet to 143μm at the outlet. The flow network used is characterized by set branching ratios for...
A one-dimensional numerical model has been developed to study diabatic and adiabatic
flow boiling in microchannels. This model accounts for developing flow effects and
variable property effects. The model uses correlations for void fraction and two-phase
multipliers found in the literature. The model has been used to study the performance...
Dried cattail and bulrush plant pieces in mesh bags were incubated in the
constructed wetland treating Pope & Talbot pulp mill effluent. Two ponds
planted with each species and two depth ranges in each pond were chosen, to
determine decomposition rates. Bags were withdrawn and analyzed at five time
points...