Index Catalog // ScholarsArchive@OSU

X-ray computerized tomography of particleboard to predict through-thickness density profile

Creator:: Gao, Hong
Abstract:: Particleboard is a widely used composite panel product consisting of consolidated wood particles and adhesive. On a macro level the panel appears to be homogeneous, however, its density varies both throughout the plane of the panel as well as through its thickness. Of concern for this thesis is the through-thickness...
Resource Type:: Masters Thesis

Utilization of ground peanut husk as an alternative fiber material for particleboard

Creator:: Newton, Jacob A.
Abstract:: This research examined the potential for using peanut husk as a fiber alternative to wood in the production of melamine-formaldehyde (MF) particleboard. MF resin was used to produce panels with one, three, six, nine or 12 percent resin contents. Modulus of Rupture (MOR), Modulus of Elasticity (MOE), Internal Bond (IB)...
Resource Type:: Honors College Thesis
Full Text:: electricity or used in the production of particle- based products such as oriented strand board, fiber board

The influence of various resin parameters on the physical properties of oak flakeboard

Creator:: Jay, Gregory Lynn
Abstract:: The substantial increase in resin costs due to the recent energy crisis, increased public awareness to the problem of free formaldehyde from boards bonded with urea-formaldehyde resins, and a projected increase in the production of exterior board have emphasized the need for new and substitute adhesive systems. One new development...
Resource Type:: Masters Thesis

Dimensional stability and water adsorption of flakeboard and particleboard as related to furnish geometry, board specific gravity, and resin type

Creator:: Vital, Benedito Rocha
Resource Type:: Dissertation

Bark as a supplemental source for wood furnish in particleboard

Creator:: Wisherd, Kurt Douglas
Abstract:: Competition for the conventional supply of wood residue utilized by the particleboard industry is increasing. Utilization of low quality residues by the pulp and paper industry, new sawmill and plywood recovery techniques, and the growing practice of converting low quality residues into steam and electrical power have all cut into...
Resource Type:: Masters Thesis

On the phenomena of fracture in particle-board

Creator:: Ilcewicz, Larry Bert
Abstract:: Nonlocal theories of continuum mechanics are used to model the fracture behavior of particleboard in tension perpendicular to the plane of the board. Classical theories of fracture are examined in comparison to a nonlocal crack solution which has removed the stress singularity at the crack tip. With the removal of...
Resource Type:: Masters Thesis

Resin efficiency : the effect of varying resin distributions upon resin performance in particleboard

Creator:: Hill, Michael Douglas
Abstract:: Past research has implied that differences in blender performance between commercial and laboratory particleboard blenders may not be attributed to resin distribution between screen fractions, as is commonly believed in the industry today, but to which particles within a screen fraction have resin and which do note To test this,...
Resource Type:: Masters Thesis

Retarding dimensional changes of particle boards

Creator:: Lehmann, William F. and Oregon State University. Forest Research Laboratory
Resource Type:: Technical Report
Full Text:: and interviews with manufacturers of particle board and hardboard were conducted to re- view methods

Risk management in particleboard production system design : a simulation study of the stochastic optimization problem

Creator:: Velazquez, Sergio Serrano
Abstract:: Effects of stochastic variations of parameters in the planning and design of a particleboard production system are studied. The solution obtained from a linear deterministic optimization model is compared against both the solution derived from the traditional stochastic programming techniques and the distribution of optimal objective function values obtained from...
Resource Type:: Masters Thesis
Full Text:: Description There are presently two major processes for making particle- board: the flat-press process and

On the fracture mechanics of oriented flakeboard

Creator:: Lei, Young-kong
Resource Type:: Dissertation
Full Text:: rate, board density, flake dimensions, and loading speed are also experimentally evaluated in terms

ScholarsArchive@OSU

X-ray computerized tomography of particleboard to predict through-thickness density profile

Utilization of ground peanut husk as an alternative fiber material for particleboard

The influence of various resin parameters on the physical properties of oak flakeboard

Dimensional stability and water adsorption of flakeboard and particleboard as related to furnish geometry, board specific gravity, and resin type

Bark as a supplemental source for wood furnish in particleboard

On the phenomena of fracture in particle-board

Resin efficiency : the effect of varying resin distributions upon resin performance in particleboard

Retarding dimensional changes of particle boards

Risk management in particleboard production system design : a simulation study of the stochastic optimization problem

On the fracture mechanics of oriented flakeboard

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search