In this work, a method for solving the differential form of the radiative transfer equation was implemented into an existing three-dimensional thermal-hydraulic computer program known as TEMPEST. The method used was the P-l approximation, where the angular distribution of the radiation intensity is represented by a truncated series of spherical...
Experimental data are reported for the time-averaged
local radiative and total heat transfer coefficients for
both an array of horizontal tubes as well as a single
horizontal tube immersed in a large-particle fluidized bed
at elevated temperatures. Spatial-averaged heat transfer
coefficients computed from the local values, using a simple
trapezoidal...
A constrained thin film desorption scheme has been experimentally tested to determine the desorption rates for water from an aqueous lithium bromide mixture through a confining membrane. Variable conditions include the inlet concentration, pressure differential across the membrane, and channel height. Desorption takes place in a channel created between two...
A rotating, flat plate condensation experiment has been developed to
investigate the heat of the Rotating Bubble Membrane Radiator (RBMR). The
RBMR is a proposed heat rejection system for space applications which uses
working fluid condensation on the inside surface of a rotating sphere to
reject heat to space. The...
A Fabric Composite Radiation Heat Transfer Study has been
conducted to determine the effective emissivities of specific
fabric composite materials. The weave of the fabric and the
high strength capability of the individual fiber in
combination with the thermal conductivity and chemical
stability of specific metallic liner, result in a...
A two-dimensional model for predicting the rate of radiation
heat transfer for the interior of an industrial furnace is described.
The model is two-dimensional due to the assumptions of the heat
source as an infinite radiating plane and the heat sink as rows of
parallel tubes that are both infinite...
An experimental and numerical study of absorption of ammonia vapor bubbles into a constrained thin film of ammonia-water solution is presented in the context of a potential reduction in size of a heat-actuated heat pump component. A large-aspect-ratio channel with a depth of 600 µm restricts the thickness of the...
Compact storage systems demonstrating increased hydrogen storage capacity are the key to advancing the growth of the hydrogen economy throughout the world and reducing the global dependence on fossil fuels for transportation. The use of highly porous adsorbent materials for reversible hydrogen storage is a promising pathway towards achieving storage...
Hydrogen has been shown to be a promising replacement for fossil fuels for use in light duty vehicles because it is a clean, renewable and plentiful resource with a high gravimetric energy density. However, in order to obtain an acceptable volumetric energy density, densification of the hydrogen is required. Adsorptive...
The need for clean and renewable fuel such as hydrogen is driven by a growing worldwide population and increasing air pollution from fossil fuels. One of the major barriers for the use of hydrogen in automotive industry is the storage of hydrogen. Physisorption is the most promising storage technique due...
An experimental study of absorption of ammonia into a constrained thin film of ammonia-water solution is presented. A large aspect ratio microchannel with one of its walls formed by a porous material is used to constrain the thickness of the liquid film. Experiments were performed at a pressure of 1,...