Powder injection molding (PIM) of ceria-stabilized, zirconia-toughened mullite composites were investigated in the present article with the goal of obtaining performance enhancement in complex geometries for energy and transportation applications. A powder-polymer mixture (feedstock) was developed and characterized to determine its suitability for fabricating complex components using the PIM process....
Published October 1968. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the Sea Grant Catalog: http://seagrant.oregonstate.edu/publications
The recyclability of 316L stainless steel powder in the binder jetting process has been determined. The powder characterization results demonstrated a 22% increase in the number of coarse particles (> 30 µm) and an 18.2% reduction in the number of small particles (< 10 µm) after recycling up to 16 times. A...
Gas-atomized Fe–24Cr–8Al–0.5Y (wt.%) powder was used as a feedstock in a laser powder bed fusion process with nitrogen atmosphere. Formation of Al–Y–O-enriched nanoparticles with diameters of 10–100 nm implied in-situ precipitation of Al–Y–O-enriched nanoparticles within the ferritic matrix developing an oxide dispersion strengthened FeCrAl alloy without any mechanical alloying. Thermodynamics...
The use of duplex stainless steels (DSS) in nuclear power generation systems is limited by thermal instability that leads to embrittlement in the temperature range of 204°C to 538°C. New lean-grade alloys, such as 2101, offer the potential to mitigate these effects. Thermal embrittlement was quantified through impact toughness and...
Revised April 1982. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the Sea Grant Catalog: http://seagrant.oregonstate.edu/publications
Depth-profiled Doppler broadening spectroscopy of positron annihilation on the cyclic fatigue-induced fracture surfaces of three amorphous Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ metallic glass specimens reveals the presence of a 30–50 nm layer of increased free volume that is generated by the propagating fatigue crack tip. The presence and character of this fatigue transformation zone...
Background:
In the Ganges Delta, chronic arsenic poisoning is a health concern affecting millions of people who rely on groundwater as their potable water source. The prevalence of anemia is also high in this region, particularly among women. Moreover, arsenic is known to affect heme synthesis and erythrocytes and the...
OBJECTIVE: To evaluate the effectiveness of a 3-month treadmill desk intervention in eliciting changes in physical activity and sedentary behavior among overweight/obese office workers. METHODS: A randomized controlled trial was conducted among overweight/obese office workers (n=41; mean age = 40.1 ± 10.1 years) at a private workplace. Participants were randomly...
Solar thermochemical energy storage has enormous potential for enabling cost-effective concentrated solar power (CSP). A thermochemical storage system based on a SrO/SrCO₃ carbonation cycle offers the ability to store and release high temperature (≈1200 °C) heat. The energy density of SrCO₃/SrO systems supported by zirconia-based sintering inhibitors was investigated for 15...
The strength-normalized fatigue endurance strength of the bulk metallic glass (BMG) Zr₅₂.₅Cu₁₇.₉Ni₁₄.₆Al₁₀Ti₅ (Vitreloy 105) has been reported to be the highest for any BMG; however, to date, there has been no explanation of why this material is so much better than other Zr-based compositions. In this study, the fatigue-crack growth...
Physical activity is important for health. However, there is a lack of literature related to the physical activity levels of adults living in urban villagers, which is a vulnerable population in China. The aim of this study is to compare the physical activity and sedentary behavior engagements between urban villagers...
Oxide dispersion strengthened (ODS) alloys exhibit superior mechanical properties due to the presence of nano-sized thermally stable oxide particles. However, manufacturing of ODS alloys is very complex and composed of numerous time consuming steps such as mechanical alloying, which is one of the main barriers toward the widespread application of...
Ice-free cryopreservation, known as vitrification, is an appealing approach for banking of adherent cells and tissues because it prevents dissociation and morphological damage that may result from ice crystal formation. However, current vitrification methods are often limited by the cytotoxicity of the concentrated cryoprotective agent (CPA) solutions that are required...
BACKGROUND: Simple and effective cryopreservation of human oocytes would have
an enormous impact on the financial and ethical constraints of human assisted
reproduction. Recently, studies have demonstrated the potential for cryopreservation
in an ice-free glassy state by equilibrating oocytes with high concentrations of
cryoprotectants (CPAs) and rapidly cooling to liquid...
The role of volumetric energy density on the microstructural evolution, texture and mechanical properties of 304L stainless steel parts additively manufactured via selective laser melting process is investigated. 304L is chosen because it is a potential candidate to be used as a matrix in a metal matrix composite with nanoparticles...