The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
Western juniper (Juniperus occidentalis) is a conifer that is native to Oregon, California, Washington, Nevada, and Idaho. Juniper is known to have highly decay resistant heartwood and is a popular choice for finished furniture. With recent forest management practices over the past 100 years have resulted in an immense population...
:
_____________________________________________________________________
ArijitSinha
Western juniper (Juniperus occidentalis) is a conifer that is native to
Western juniper (Juniperus occidentalis) is a “native invasive” tree species in Eastern Oregon. It is extremely good at finding and consuming water in arid climates, which makes it difficult for other plant species, especially sagebrush and grasses to survive. Sagebrush and grasses are necessary for the survival of the sage...
Mass timber (MT) offers viable eco-conscious solutions within the building industry, with its high strength ratings, dimensional stability, light weight and renewable nature enhancing its status as a low carbon alternative to conventional building materials like steel and concrete. Moisture intrusion, coupled with the inherent organic nature of wood pose...
The engineering community is increasingly moving towards the design of seismic force-resisting systems that limit post-earthquake damage and reduce downtime to increase urban resiliency. For example, structural spines can be used to provide an elastic load path to impose a more uniform drift distribution with building height, thereby reducing the...
To quantify the postpeak residual capacity and
to gain insights into the load transfer mechanism of a shear
wall, nail connection tests were performed on salvaged
connections after a monotonic shear wall test loaded up
to peak load. Experimental results reveal that there is a
loss of strength in most...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
The advent of synthetic adhesives has transformed the structural applications of wood. However, a persistent issue in adhesively-bonded wood products has been moisture durability. When designing wood based composites, moisture durability will depend on both the wood phase and the adhesive phase. A key question, therefore, is how does one...
With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
:
_____________________________________________________________________
Christopher Higgins ArijitSinha
With growing interest in mass timber, especially
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
Concrete formwork is a common type of temporary structure used on construction projects. Due to difficulties in considering actual construction site implications during formwork design, assessments of formwork integrity are often made in the field by site personnel based on subjective visual inspection. The use and re-use of concrete formwork...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
Timber-concrete composite (TCC) floors have improved strength and stiffness when compared to timber-only floors, allowing for longer spans in buildings and improved life safety. However, North America does not have codes and standards that recognize TCC floors, particularly the improved life safety performance of these floors in fire. Therefore, alternate...
Timber-concrete composite (TCC) solutions originated in the early twentieth century. There has been a renewed interest in TCC solutions in modern mass timber buildings, especially for floor systems. However due to lack of data, design standards, and code acceptance, TCC solutions require that new mass timber solutions be tested, and...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
Connections in mass timber structural systems dissipate energy and transfer lateral forces from mass timber elements such as shear walls and diaphragms, providing critical load paths. Cross-laminated timber (CLT) is a prominent mass timber material used to manufacture wall and floor assemblies. Fire performance research of CLT walls and floors...
Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...