Augered cast-in-place piles, also known as ACIP piles, have been used for more than
seven decades in the United States and have gained in popularity due to their relatively
quick installation and cost-effectiveness. Owing to the reduced impact on the neighboring
environment as compared to some other deep foundation installation...
In the past two decades, a great amount of attention has been
paid to investigating the economic and safe operation of power
systems using modern mathematical techniques. The classic economic
dispatch problem, now often called the Optimal Power Flow problem,
has been formulated as a mathematical optimization problem and has...
This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Original report issued March 1955.
This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Deep foundations are necessary for the construction of many structures, such as bridges and buildings, located in areas unsuitable for shallow foundations. Owing to the inherent variability of soil and the complex changes that occur in the soil adjacent to deep foundations as they are installed, the ability to accurately...
Non-destructive testing methods and applications have become of increasing interest due to the worldwide aging and deteriorating infrastructure network. In the field of Civil Engineering, bridges and bridge components as well as non-structural elements such as roadway pavements for example, are affected. In particular, the Acoustic Emission (AE) technique offers...
This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued December 1956.
This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed September 1962. Original report dated December 1955.
This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued April 1955.
This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Revised June 1953.
Due to age, original design that is deficient by modern standards, inadequate maintenance, environmental conditions, and increasing loads, large numbers of bridges in United States and elsewhere are classified as deficient and in need of rehabilitation or replacement. According to a national bridge inventory established by the Federal Highway Administration,...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
This dataset includes the finite element models (FEMs) used for the MS Thesis entitled: Influence of Uncertainties in Terrestrial Laser Scanning on Structural Reliability and Bridge Load Rating by Carly K. Loving. These FEMs were created in SAP 2000
and contain models from both thesis manuscripts. The following lists summarizes...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
An analysis method for moving loads computes the internal demand history in a structural member at integration points of force-based finite elements as opposed to the end forces of a refined displacement-based finite element mesh. The force-based formulation satisfies strong equilibrium of internal section forces with the element end forces...
This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Revised December 1957. Original report published June 1952.
This research examines the downstream fining phenomenon as it operates in coastal gravel-bed rivers of Oregon. Downstream fining is a change in bed composition toward smaller sediment sizes in the downstream direction. Changes in stream flow discharge and channel slope affect the rate of bed-load transport, thereby altering the downstream...