SIDAC-I is a digital analog simulator which permits analog as
well as hybrid simulations to be programmed on a digital computer.
FORTRAN, a scientific computer language, may be included as an
integral part of the SIDAC-I simulation language. The simulator
consists of a controller program and a set of predefined...
I have developed an analytical method for the determination of
molecular hydrogen in seawater. It is based on the change of hydrogen
concentration in a 30 cc. volume of air as it is equilibrated with a
one-liter sample of seawater. The change in hydrogen concentration in
the air is measured...
The interference of sulfide with the colorimetric determination of
nitrite, by the method of Bendschneider and Robinson (1952), can be
eliminated by passing the samples through a cationic exchange resin,
Dowex 50W-X8, in the zinc form. This resin retains sulfide without
affecting nitrite and the technique can be applied to...
Meridional fluxes of silica across the Southern Ocean polar front
are attributed to two different processes which generally act in opposite
directions. Equatorward low frequency fluxes of silica inferred from
ISOS current meter data in the Drake Passage are approximately balanced
by poleward meridional diffusion of silica along surfaces of...
Sixteenth century Elizabeth I of England has long been a figure of interest to Renaissance scholars, and their work largely focuses on how her gender impacted the power, politics, and culture of her day. Many have perceived her to be a heroine whose ingenuity and determination circumvented the limitations imposed...
Successfully predicting an accurate estimated cost is important in the assembly planning process. When designing an assembly plan, an accurate estimation ensures that the proposed plan can be achieved within the predetermined budget. However, achieving an accurate prediction is a challenge since it requires professional judgment, which is dependent upon...
We used a dynamic hydrology model to simulate water table depth (WTD) and quantify the relationship
between Saint Louis encephalitis virus (SLEV) transmission and hydrologic conditions in Indian River
County, Florida, from 1986 through 1991, a period with an SLEV epidemic. Virus transmission followed
periods of modeled drought (specifically low...
This bibliography, recording forestry theses produced during 1953-1955, together with a substantial number of additional theses prepared during 1904-1952, is the first supplement to Forestry Theses Accepted by Colleges and Universities in the United States, 1900-1952 published by Oregon State College in 1953. Approximately one-third of the theses here listed...
The goal of this thesis is to ease the adoption of energy-efficient (EE) building strategies for affordable homes in the United States (US). Low-wage earning households spend nearly three times the proportion of their gross annual income on home energy bills resulting in higher energy burden for them when compared...
The application of residue notation is another
approach for solving the problem of carry propagation in
arithmetic units. Most other methods for solving this
problem are based on changes in adder design and the use
of improved components.
Residue arithmetic has the inherent property of
requiring no carries between moduli....
The use of consumable -electrode arc melting as a production technology
is growing. An advantageous feature of the process is the avoidance of ingot
contamination by soluble crucible materials. This is accomplished by the
expedient of employing a chilled metal crucible. As might be expected, the
thermal balance under these...
Highway work zones are extremely dangerous environments due to the presence of workers near high-speed traveling vehicles. This dynamic environment results in a disproportionate number of accidents that cause injury and casualty to both drivers and workers due primarily to vehicular intrusions into work zones. Several emerging work zone intrusion...
Debris generated after a disaster event must be disposed efficiently for community recovery. This is a significant operation that accounts for up to 27% of the total recovery costs. Generally, debris removal takes place in two phases: the short-term relief phase, which involves debris removal immediately after a disaster to...
The construction industry is infamously recognized for having jobsites identified as hazardous working environments due to workers-on-foot commonly functioning at dangerous heights and in close proximity to other construction entities, among other reasons. These hazardous operations result in an increased risk of worker injuries and fatalities caused by fall hazards...
The two primary considerations for highway work-zones are its effect on commuter mobility and worker safety which are often spoken of together. However, it must be noted that they often conflict with each other. For example, traffic control plans that reduce travel speed in work-zones improve both commuter and worker...
The continuous improvement of construction operations requires a systematic approach of monitoring and making appropriate control actions. However, the lack of real-time information hinders this workflow and eventually compromises timely and effective decision-making. Project managers spend a great deal of time and effort to solve problems emerging from lack of...
Modular construction is increasingly seen as an efficient construction method in terms of time, cost, and energy. The full realization of these advantages partly relies on the efficiency of the production process inside the modular factories, which currently rely on tedious manual monitoring methods or expensive automated techniques. As a...
Planning and management methods in construction need to constantly evolve to keep pace with the growing demand and complexity of work in increasingly competitive environments. This need for innovation and process improvement has attracted lean construction philosophy in industry management practice. Lean has been used in the construction industry to...
In this thesis, I present studies in the field of terahertz [THz] spectroscopy. It covers both the generation and detection of ultra-fast broadband THz pulses, as well as the transmission properties of vertically grown multi-walled carbon nanotube forests [MWCNTs]. We have found that these vertically grown MWCNTs respond strongly to...
The emergence of the three-input majority gate as a practical element for logical design has demanded a useful method of design using these elements. In order to facilitate the use of this gate, a digital computer program is presented to implement the design procedure. Utilizing the truth table of a...
This thesis considers the worst-case design of transistor
circuits for the realization of Majority Logic.
First the meaning of Majority Logic is discussed. The requirement
of an odd number of inputs for the realization of Majority
Logic is justified. The usefulness of Majority Logic in synthesizing
a Boolean expression is...
This paper is the result of extensive experiments, investigating the effect on typical distribution transformers when operated overexcited as much as 117% of their rated voltage.
The performance of certain high-gain amplifiers, such
as those used in null detectors, can be greatly improved
by using a nonlinear element in a feedback loop. With the
addition of nonlinear feedback, it is possible to obtain
an amplifier that can handle a large dynamic range of input
signals without...
Instruments which combine the features of a digital-to-analog
conversion and a linear-to-logarithmic scale change usually perform
the digital-to-analog conversion first. These instruments are accurate
to within five or ten percent over ranges of five or six decades.
This thesis presents a method which uses combinatorial logic
to perform the linear-to-logarithmic...
The worst case analysis of rounding error of eleven numerical
quadrature formulas on a computer with floating-point arithmetic,
base b, and t digit mantissa is calculated. These results are
applied to five different integrands using the digital computer CDC
3300 located at Oregon State University. Central processing unit
computing time,...