Supercritical fluids can markedly enhance preservative treatment of wood, but the high pressures employed can lead to collapse. We investigated the effects of the rates of pressure application and release on displacement of white spruce lumber during supercritical impregnation with carbon dioxide. Displacement was greatest when pressure was rapidly increased...
The demand for portable electronic systems and the continued
down-scaling of device dimensions resulted in rapid improvement in
the performance of integrated systems. Several low-voltage design
techniques have been proposed to operate analog circuits with sub-1V
supply. However, these techniques require higher power consumption
to achieve large dynamic range while...
The connectivity among straits of the northwest Pacific marginal seas is investigated with a primitive-equation ocean circulation model simulated for 10 years from 1994 to 2003. Over the simulation interval the temporal and spatial means and variations of the model sea surface temperature are comparable to those of the satellite...
We report ultrafast pump-probe spectroscopy examining exciton dynamics in atomically thin MoS2. Spectrally and temporally resolved measurements are performed to investigate the interaction dynamics of two important direct-gap excitons (A and B) and their associated broadening kinetics. The two excitons show strongly correlated interexcitonic dynamic, in which the transient blue-shifted...
Performance-based design has gained interest in recent years among structural designers and researchers. Performance-based design includes selection of appropriate building sites, structural systems and configurations, as well as analytical procedures used in the design process, to confirm that the structure has adequate strength, stiffness and energy dissipation capacity to respond...
Projected to reach one million people next year, international students in the United States are undergoing a transformative educational migration. Moving away from the existing study abroad paradigm is the first step to more accurately understand the lived experience of an educational migrant. Discovering the perceptions of what value an...
In this thesis, I present studies in the field of terahertz [THz] spectroscopy. It covers both the generation and detection of ultra-fast broadband THz pulses, as well as the transmission properties of vertically grown multi-walled carbon nanotube forests [MWCNTs]. We have found that these vertically grown MWCNTs respond strongly to...
This dissertation presents nonlinear terahertz (THz) properties of carbon nanomaterials investigated by time-resolved high-field THz spectroscopy. In order to determine THz characteristics of nanomaterials, we performed THz power spectrum measurement, THz raster imaging, THz time-domain spectroscopy (THz-TDS) and time-resolved pump-probe experiment on two different types of single layer graphene and...
The AE32000 processor core, developed by Advanced Digital Chips Inc., Korea, is used primarily in the embedded processing environment. The AE32000 simulator models this embedded processor core having high code density. An enhanced simulator was developed to study the performance of the present Instruction Set Architecture after comparison with the...
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...
Zinc Sulfide (ZnS) thin film, with a wide band gap, has been used for many applications, such as buffer layer for CIGS solar cells, light emitting diodes and thin film electroluminescent devices.
In this work, ZnS thin films were prepared using two different deposition processes. In the first method, ZnS...
Laser powder bed fusion (LPBF) is an innovative method where metal powder is fused together to generate complex geometries. LPBF is used as a technology to reduce material waste, and extensive labor that are often linked to conventional subtractive manufacturing. H13 tool steel is one of the widely used materials...
As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
In this dissertation, a series of studies in the field of terahertz (THz) science are presented, specifically using nonlinear THz spectroscopy. We exploit huge field enhancement and subwavelength confinement in plasmonic structures. There are three distinct projects which will be discussed: nonlinear THz spectroscopy using plasmonic induced transparency (PIT), THz-triggered...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
Data converters are ubiquitous building blocks of a signal chain. The rapid increase in
communication and connectivity devices presents new avenues for pushing the state of
the art analog to digital converters. Techniques for improving resolution, bandwidth,
linearity and bit-error rate, while reducing the power, energy and area is the...
Evolution of the mobile communication standards and proliferation of hand-held devices mandate stringent Analog-to-Digital Converter (ADC) specifications. Among various ADCs, a ∆Σ ADC is best known as a power-efficient ADC when more than 12b is required. However, a conventional discrete-time (DT) ∆Σ Modulator (∆ΣM) is inadequate for low-power wideband applications...
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
The continued scaling of deep-submicron CMOS technology enables low-voltage high-frequency phase-locked loops (PLLs) to be fully integrated in complex mixed-signal systems. However, fluctuations due to the manufacturing process and variations in
environmental conditions, such as supply voltage and temperature, are also significantly increased. As a result, the performance of PLLs...
Phase-locked loop (PLL) frequency synthesizers lie at the heart of most radio transceivers. An important objective of the electronics and communications industry is to design high-speed building blocks which dissipate the lowest possible power, and to ac- complish this with the cheapest technology. The dual-modulus prescaler is one of the...
To realize pipelined ADCs in deep-submicron processes, low voltage techniques
must be developed to work around problems created by limited supply voltages such as
the floating switch dead zone, reduced SNR, and reduced OpAmp performance.
This thesis analyzes standard and low voltage design issues for pipelined ADCs
and proposes a...
Delay insensitive asynchronous circuitry provides significant advantages with
respect to substrate noise due to localized switching. The differences between the
substrate noise from NULL Convention Logic (NCL) and traditional Clocked
Boolean Logic (CBL) are described and analyzed based on measured results. A test chip fabricated in the TSMC 0.25 um...
Sugar phosphate cyclases (SPCs) are enzymes involved in the biosynthesis of many important natural products. SPCs form a unique cyclitol during the early steps in the biosynthesis of many natural products. These natural products include rifamycin, which is chemically modified to rifampicin and used clinically as an antituberculosis drug, and...
Efficient methods for simulating the substrate noise generated by complex synchronous and asynchronous digital logic circuits are presented. By simulating digital logic at the gate level, and precharacterizing the gates, the substrate noise generation can be predicted and used in a transistor level simulation of the sensitive analog blocks. This...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
Ribomimetic natural products have long been known for their important biological activities. Structurally, they contain a densely functionalized cyclopentane unit that resembles ribose. Pactamycin, the prominent member of this class of natural products, is a potent protein synthesis inhibitor produced by the soil bacterium Streptomyces pactum. In pactamycin, the aminocyclopentitol...
Successive sampling population size estimation (SS-PSE) is a method used by government agencies and aid organizations around the world to estimate the size of hidden populations using data from respondent-driven sampling (RDS) surveys. SS-PSE ad-dresses a specific need in estimation and helps us evaluate the vulnerability of areas to HIV...
The cocondensation reactions of molybdenum trioxide vapor with
tetraalkoxysilanes, trimethylalkoxysilanes, and hexamethyldisiloxane
at -196°C were investigated. The products from the metal vapor
reactions of tetramethoxysilane, tetraethoxysilane, and tetrapropoxysilane
were characterized as molybdenum(VI)dioxodialkoxy compounds. The isolated compounds were found to be polymeric in the
solid state by bridging through alkoxide groups....
Within the past several years the technology of high-throughput sequencing has transformed the study of biology by offering unprecedented access to life's fundamental building block, DNA. With this transformation's potential a host of brand-new challenges have emerged, many of which lend themselves to being solved through computational methods. From de...
Bullying prevents its targets from enjoying a safe, stress-free living, learning, and working environment. For most children, bullying experiences will be merely unpleasant childhood memories. This remains the same in adult's working environment. During the past decade, the concept of workplace abuse has had an increasing resonance within western countries....
It is desirable for complex engineered systems to perform missions efficiently and economically, even when these missions' complex, variable, long-term operational profiles make it likely for hazards to arise. It is thus important to design these systems to be resilient so that they will actively prevent and recover from hazards...