A waveform-preserving, variable time-delay system capable of
several milliseconds delay is described in this thesis. These considerably
long delays are achieved by judicious use of the relatively
low sonic velocity of gases. Initial system design criteria specified
a time delay of ten milliseconds and a signal bandwidth of 0-10 KC....
A machine capable of demonstrating and solving queueing
problems is useful to any systems engineer. This paper describes
a successful queueing simulator constructed from readily available
materials. The machine is easy to operate, portable, and simple
enough to be built in any well equipped machine shop.
The educational values of...
The X-ray dose absorbed in soft tissue located near plane
bone interfaces and in parallel-slab bone cavities was measured
experimentally with a polyethylene-film dosimeter.
The dose absorbed in soft tissue adjacent to plane bone interfaces
was measured by placing a 12.7 micron film of polyethylene,
upon which were deposited graphite...
The use of consumable -electrode arc melting as a production technology
is growing. An advantageous feature of the process is the avoidance of ingot
contamination by soluble crucible materials. This is accomplished by the
expedient of employing a chilled metal crucible. As might be expected, the
thermal balance under these...
This study originated with industry recognition of inadequate
flexibility in currently used procedures for grading, sizing, and
packaging fresh apples in North Central Washington. Field-run apples
are introduced into the process, and nearly all of the product must
be placed in a marketing package in the process. Portions of the...
When the dc conductivities of various pure KC1 crystals were
compared it was found that crystals grown under an HC1 atmosphere,
from salt purified by ion exchange, exhibited lower knee temperatures
than any of the crystals studied. These knee temperatures
were found to be approximately 350°C. From this the total...
A procedure is described for the optimization of a previously
described continuous analysis adaptation of the Pearl-Benson or
nitroso method for estimation of spent sulfite liquor (SSL) or ligno-sulfonates.
The optimized procedure has a response time of 6.5 minutes. In order to monitor samples whose SSL concentration is
between 0...