This paper investigates a particular bridge construction technique
which could result in a significant torsional moment. The
structural member under consideration is a prestressed concrete
girder for which no torsional consideration is made.
Torsional shear stresses can be adequately approximated for
an I-shaped girder. Laboratory model tests were performed to...
Large numbers of 1950's vintage conventionally reinforced concrete (CRC) bridges remain in-service in the national bridge inventory. Many of these bridges are lightly reinforced for shear. Evaluation of these bridges to prevent unnecessary and costly repairs requires refined analytical techniques. This dissertation presents finite element (FE) modeling and comparisons of...
Performance evaluation of conventionally reinforced concrete (CRC) bridge superstructure elements with diagonal cracks is of interest to the bridge engineering community. Standardized methods to predict service-level stress magnitudes in cracked bridge girders under combined bending and shear forces are not available. An analysis procedure was developed to determine the response...
Thermal cracking of asphalt concrete pavements is responsible for millions
of dollars in annual maintenance and rehabilitation costs in the United States and
Canada. Thermal cracking is typically associated with low temperatures in
northern climates and at high elevations. However, another form of thermal
cracking, known as thermal fatigue cracking,...
Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Corrosion of reinforcement is recognized as the predominant factor that limits the service life of reinforced concrete (RC) structures exposed to aggressive environments. This corrosion deterioration can lead to damage resulting in capacity loss or even failure. For structures exposed to coastal marine environments or deicing or anti-icing applications, this...
Carbon fiber reinforced polymer (CFRP) materials are emerging as an effective means of strengthening and rehabilitating bridges. Near surface mounting (NSM) is a newer technique for application of CFRP for retrofitting of bridge members that provides advantages over conventional strengthening techniques. The technique is still new and uncertainties remain regarding...
Due to age, original design that is deficient by modern standards, inadequate maintenance, environmental conditions, and increasing loads, large numbers of bridges in United States and elsewhere are classified as deficient and in need of rehabilitation or replacement. According to a national bridge inventory established by the Federal Highway Administration,...
A need exists to develop a non-destructive testing technique that can identify
the formation and propagation of diagonal tension cracks in conventionally
steel reinforced concrete deck girder (RCDG) highway bridges in the State of
Oregon. Such a technique could be included into a structural health
monitoring (SHM) system installed on...
Oregon Department of Transportation’s bridge no. 9743b is a multi-span, two-girder steel deck bridge connecting the busy interstates 5 and 205. Vertical cracks have been detected in the welded girder-to-crossbeam connections at the bents. Distortion-induced fatigue is suspected to be responsible for the cracking. Linear elastic beam analysis, 2-D and...