The harmonic problem in power systems is gaining more attention as incidences correlated with harmonics increase. Conventional passive filtering techniques for harmonic mitigation have inherent problems, and purely active filters have the disadvantages of higher costs and ratings. Hybrid active filters inherit the efficiency of passive filters and the improved...
Pulse Width Modulation (PWM) has been used extensively for motor control, DC-AC
converters, DC-DC converters and in audio applications. The conventional method of
generating a pulse width modulated signal involves generating an accurate sawtooth or triangle
wave using analog circuits. In CMOS, being analog circuit intensive puts extra constraints
on...
Power quality has become an important concern to both electric utilities and
end users due to the increased use of non-linear loads in modem power systems
over the past decade. Nonlinear loads inject harmonics into the power system and
thus may lead to poor power quality and lower power factor....
The design of a 10-bit pipelined charge redistribution DAC employing MOSCAPs biased in their accumulation mode is presented in this thesis. A switched capacitor filter and output buffer have also been designed for the system. The effect of MOSCAP nonlinearity on the performance of the pipelined charge redistribution DAC has...
With advancements in CMOS technology, high speed analog circuits that were
traditionally implemented with discrete circuit components can now be made monolithically.
Antialiasing filters for video signals as well as signal conditioning filters in high
speed communication channels are examples of applications where high frequency integrated
circuits are now feasible....
A novel switched-R-MOSFET-C input branch is proposed for low-voltage and high-linearity applications. The tunability is achieved by varying the clock duty cycle using an automatic tuning circuit. This tuning method does not involve a change in gate voltage, and is therefore particularly suitable for low-voltage applications. The advantages of the...
With the increased attention on high efficiency and energy savings, power electronic energy conversion equipment is increasingly incorporated in all levels of the power system. The drawback of such equipment is the generation of nonsinusoidal currents in the power distribution network due to the nonlinear operation. Harmonic currents may distort...
A new approach to oversampled delta-sigma A/D converters ( AZ modulators ) is introduced, where a differential pseudo-Npath filter stage is used as a basic cell. In this band-pass application, the z to -zN transformation is employed to realize a RAM-type pseudo-2-path lossless integrator. The bandpass second-order and 4th-order delta-sigma...
The properties of linear active coupled lines consisting of
electrically long GaAs MESFET structures are investigated for possible
applications as traveling-wave broad-band amplifiers. In addition,
the nonlinear coupled Schottky lines are studied for applications as
voltage tunable circuit elements.
The analysis of the general active asymmetric coupled transmission
lines in...
Direct-conversion architecture would dominate the modern low power wireless receiver architecture if problems such as offset cancellation, even-order distortion, and flicker noise were solved. Among those problems, offset is the most serious one. This thesis will discuss and analyze one approach to cancel offsets in direct-conversion receivers. First, we explain...