The ability to engineer stiffness and strength in any desired direction make composites an ideal material candidate for various applications when compared to their traditional isotropic counterparts. In spite of this, the ability to model the material response in composites has yet to be fully explored. Composite research largely focuses...
Simulation models were developed to explore the reversible nature of gecko dry
adhesion system. The central idea of this model is that even with a small moment imparted on the contact tip, the seta can be easily ad-adhered. It is shown that this contact condition is very sensitive, but can...
Augered cast-in-place piles, also known as ACIP piles, have been used for more than
seven decades in the United States and have gained in popularity due to their relatively
quick installation and cost-effectiveness. Owing to the reduced impact on the neighboring
environment as compared to some other deep foundation installation...
The albedo of Arctic sea ice depends greatly on the formation of melt ponds. These ponds form in depressions on the ice as surface snow melts during the summer months, and their location is determined mainly by the initial snow topography. Using a high resolution sea ice model forced with...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
This thesis contains three parts addressing the asymptotic analysis of fluid flow through fully saturated porous medium in the presence of an adjacent thin channel.
In the first part the problem is modeled by Darcy's law in both the porous medium and in the channel. The permeability in the channel...
Hydrodynamic models are used as a diagnostic tool to understand the temporal variability of shallow-water processes that are difficult to completely resolve with traditional field measurements. For all simulations, modeled quantities are qualitatively or quantitatively compared with available measurements to gain confidence in conclusions derived from the modeled results. In...
An experiment on solitary wave impact on a vertical cylinder was conducted in the three-dimensional wave basin at the Oregon State University Hinsdale Wave Research Laboratory. The cylinder was designed using mechanic principles and finite element analysis techniques to enable accurate measurement of horizontal force and overturning moment. Video data...
Aquifer recharge is generally driven by fluids that move from the Earth’s surface to groundwater through the unsaturated zone, also known as the vadose zone. When the vadose zone is fractured, fluids, which may include contaminants, can move through the fracture network as well as the porous matrix. Such a...