In the field of civil infrastructure, bridge desks are typically constructed using high performance concrete (HPC). Concrete bridge decks demand qualities such as low permeability, high abrasion resistance, superior durability, and long design life. Over decades of field and laboratory experience, many HPC bridge decks have been found to be...
Failure of a gusset plate that caused the I-35W Bridge collapse in Minneapolis, MN resulted in mandated rating of connections by the Federal Highway Administration (FHWA). Rating connections requires material properties as an input. The material properties are generally reported on the available detailed drawings for bridges. However, some bridges...
The production of cement and concrete results in the production of large amounts of CO₂ emissions which can have significant negative environmental impacts. Using supplementary cementing materials (SCMs) as a cement replacement is an effective solution to reduce these negative environmental impacts, as most SCMs are waste by-products from other...
Some of the next generation of small modular reactors have been designed with helically coiled steam generators integrated into the reactor vessel to enhance natural circulation. According to the developers of TASS/SMR, a one-dimensional thermal hydraulic code written to model the Korean Atomic Energy Research Institute's SMART reactor, the Žukauskas...
The research presented in this thesis assessed the use of high strength steel (HSS) reinforcement for use in reinforced concrete (RC) bridge columns. HSS is not currently allowed in reinforced concrete bridge columns due to a lack of information on the material characteristics and performance information when used in RC...
Most specifications for ready-mix concrete (RMC) limit mixing time to 90 minutes and/or truck drum revolution counts (DRC) to 300 before discharge. These specifications have been in place for many years with the objective of ensuring the quality and performance of the finished concrete product. However, limited research has been...
Large numbers of reinforced concrete deck girder (RCDG) bridges were built during the highway infrastructure boom of the 1950's. The advent of standardized deformed steel reinforcing bars during this time allowed for straight bar terminations in flexural tension regions. Designers of the time terminated reinforcing bars where they were no...
There is renewed interest in North America for the use of calcium aluminate cement (CAC) in infrastructure repair. The interest is driven by the specialty properties that make CAC the ideal candidate for particular applications. These include rapid strength gain, even at temperatures approaching 0°C, the ability to customize fresh...
Cast-in-drilled-hole (CIDH) piles are often constructed to depths that are inaccessible to internal vibration of the concrete. Internal vibration is necessary to consolidate the concrete and, if not performed, then typically inspection pipes are necessary to detect the presence of voids in CIDH piles. Void detection is critical to assessing...
Wave energy is emerging as a new potential source for renewable energy generation. However, wave energy technology is not currently cost competitive with other more mature renewable energy sources such as wind and solar. One approach that researchers and developers are taking to reduce the cost of wave energy is...