Index Catalog // ScholarsArchive@OSU

Creator:: Stamm, Alfred J. (Alfred Joaquim), 1897- and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: referring to one o f the molded plywood airplanes . Resin treated laminated woods in both th e uncompressed

Creator:: Erickson, E. C. O., Boller, Kenneth H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, June 1959.
Resource Type:: Technical Report
Full Text:: parallel-laminated and cross- laminated material in the two principal directions, lengthwise and crosswise

Creator:: Selbo, M. L. (Magnus Leonard), 1901- and Forest Products Laboratory (U.S.)
Abstract:: Report originally dated October 1947. Information reviewed and reaffirmed in 1962.
Resource Type:: Technical Report
Full Text:: information as to the amount of end trimming that would be required for laminated material. The 3-inch

Creator:: Luxford, R. F. (Ronald Floyd), 1889-, Krone, Robert H., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: investigation to compare the strength properties of laminated, bolted, and solid keels. Description of Material

Creator:: Luxford, R. F. (Ronald Floyd), 1889-, Krone, Robert H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956 and 1962.
Resource Type:: Technical Report
Full Text:: supply of material. The usual practice in fabricating laminated products is to bend and glue the

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1959. Original report issued June 1953.
Resource Type:: Technical Report
Full Text:: fabric, number 181-114, parallel-laminated with a polyester laminating resin (resin 2) of the alkyd

Creator:: Youngs, R. L. (Robert Leland), 1924- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued October 1955.
Resource Type:: Technical Report
Full Text:: - laminated glass-fiber-reinforced polyester laminates. The data supple- ment those of Forest Products

Creator:: Kimball, Kenneth Edmund and Forest Products Laboratory (U.S.)
Abstract:: This report presents the results of tests made to determine the effect of different types of configurations and notches on the tensile strength and fatigue strength of a typical epoxy laminate. Tension tests were first made of 13 groups of specimens having different forms. Based on the results of the...
Resource Type:: Technical Report
Full Text:: if the material is notch sensitive, then it would be expected that the fatigue strength of the

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: This report presents the results of fatigue tests of an epoxide laminate subjected to axial loading. Direct stress tests were made at 0°, 15°, 30°, and 45° to the warp direction. Stress was applied at a frequency of 900 cycles per minute at zero mean stress on both unnotched and...
Resource Type:: Technical Report
Full Text:: . About 40 percent of the laminated material was uses for tests of mechani- cal and fatigue properties

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report has been prepared as a supplement to Forest Products Laboratory Report No. 1823, "Fatigue Tests of Glass-Fabric-Base Laminates Subjected to Axial Loading." It presents a correlation of the fatigue data in the basic report with stress-rupture data on the same material reported in Forest Products Laboratory Report No....
Resource Type:: Technical Report
Full Text:: material reported in Forest Products Laboratory Report No. 1839, "Stress-Rupture Tests of a Glass-Fabric

ScholarsArchive@OSU