Published November 1958. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
Diffusion bonding cycle times can be a large cost factor in the production of metal microchannel devices. The challenge is to significantly minimize this cost by reducing the bonding cycle time through rapid and uniform heating and cooling within the bonding process. Heating rates in diffusion bonding processes are typically...
An alumina microreactor was designed and fabricated to study the synthesis of nanosized silicon nitride powder via the ammonolysis of SiO vapor at temperatures ranging from 1300°C to 1400°C. It is the first high temperature ceramic microreactor capable of operating at temperatures upto 1600°C. The microreactor was designed using 3D...
Solution deposition offers an attractive, low temperature option in the cost effective production of thin film solar cells. Continuous microreactor-assisted solution deposition (MASD) was used to produce nanocrystalline cadmium sulfide (CdS) films on fluorine doped tin oxide (FTO) coated glass substrates with excellent uniformity. We report a novel liquid coating...
Cadmium sulfide (CdS) thin films are commonly used as buffer layers in thin film solar cells and can be produced by a number of solution and vacuum methods. We report the continuous solution deposition of CdS on fluorine-doped tin oxide coated glass substrates using Microreactor-Assisted Solution Deposition (MASD (TM)). A...
Single-layer and three-layer microchannel adsorption devices were fabricated by procedure that was newly developed. Aluminum was chosen for metal housing while the adsorption pair was silica gel and water. Each adsorption layer contained two layers of 250 μm-thick silica gel. Both silica gel layers opened to the same layer of...