The objective of this project is to demonstrate the feasibility fiber-reinforced turbine components through a design and manufacturing study. The motivation for using composites is to reduce weight and simplify manufacturing especially at high production volumes. In addition, natural fiber composites are implemented for applicable components to reduce environmental impact....
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
Oregon State University has conducted research in collaboration with TerraPower, LLC,
to perform a top-down scaling analysis of an integrated test facility. The goal of this
facility is to simulate transient and quasi-steady phenomena at a reduced scale,
including steady-state operation, pump coastdown, natural circulation, reactor head heat
transfer, and...
This work proposes a framework of concept generation and evaluation that takes into consideration the benefit of creativity and innovation in current market trends. By educating engineers in how to increase creativity in concept design and assess it quantitatively, the next generation of designers will be a step ahead of...
Complex digital circuits such as microprocessors typically require support circuitry that has traditionally been realized using analog or mixed-signal macros. PLL circuits are used in many integrated applications such as frequency synthesizers and inter-chip communication interfaces. As process technologies advance and grow in complexity, the challenge of maintaining required analog...
The Multi-Application Small Light Water Reactor (MASLWR) is a small natural circulation pressurized light water reactor design that was developed by Oregon State University (OSU) and Idaho National Engineering and Environmental Laboratory (INEEL) under the Nuclear Energy Research Initiative (NERI) program to address the growing demand for energy and electricity....
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
The main objective of this research study is to incorporate construction worker safety and health into sustainable design and construction practices. This can be fulfilled by the development of an innovative construction worker safety and health planning tool, called Sustainable Construction Safety and Health (SCSH) Rating System that will:
•...
As the Tekbots program expands into senior and graduate level classes at Oregon State University, so does the need arise for more complex learning platforms. These complex hardware platforms cannot be adequately tested in a manufacturing environment as we have done previously. Also, due to their complexity, these platforms require...
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...