As a group of promising semiconductor materials, metal chalcogenides in thin film form have been widely used in electronics and optoelectronics applications, such as solar cell devices and photon sensors. Unfortunately, the film size and product throughput are limited by the current vacuum-based thin film deposition techniques. Solution-based thin film...
Continuous liquid-liquid two-phase separation is needed in microfluidic devices. Due to the small characteristic lengths of microreactors, phenomena such as mass transport via molecular diffusion occur within seconds. Typically, discrete slugs of an extract are created within microchannels for high specific interfacial area to achieve intensified mass transfer. A challenge...
Analytical chemistry is an area of chemistry primarily focused on the study and use of instruments for separation, identification, and quantification of an analyte of interest. Specifically, separation science within analytical chemistry often refers to the process of dividing mixtures into their small component parts based on differences in their...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Several radioxenon isotopes (¹³¹ᵐXe, ¹³³Xe, ¹³³ᵐXe, ¹³⁵Xe) are characteristic byproducts of nuclear explosions, and due to their chemically nonreactive nature can easily escape from tests occurring underground and enter the atmosphere. It has been shown that by utilizing beta-gamma coincidence techniques, the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO) can...
In order to more effectively design large, complex systems, risk must be accounted for throughout the design process. A systematic way to account for risk is by using system model simulation. During the conceptual design phase, functional models can be drawn to help the engineer design their system's functional architecture....
This research investigates shape optimization process, using b-spline models and panel methods, to achieve a high lift to drag ratio for an aerodynamic structure. This research is a proof of concept for further research in aerodynamic shape optimization. The coupled process, involving the design and optimization of a random shape,...
The overall concept of reducing laboratory operations to a scale that fits on a single microfluidic chip has been an attractive area of research over the last several decades. Despite a surge in research, few commercial success stories have been written. Lab-on-a-chip technologies have the capability to be cost effective...
CR-39 foils were irradiated as part of nuclear accident dosimetry experiments using the Godiva reactor at the Nevada National Security Site and the Caliban and Prospero reactors at the Valduc Centre for Nuclear Studies in France. The irradiated foils were chemically etched using the standard Lawrence Livermore National Laboratory process...
Incremental ADCs (IADCs) have found wide applications in sensor interface circuitry since, compared to ∆Σ ADCs, they provide low-latency high-accuracy conversion and easy multiplexing among multiple channels. On the other hand, continuous-time ∆Σ ADCs (CTDSM) have been receiving more and more attention as a power-efficient solution in targeting medium to...