These notes on Bonding and DC systems for boats summarize recommendations made at a series of Sea Grant workshops held between 1974 and 1978. The workshops were conducted by Don A. Cunning, instructor of marine electronics, Ketchikan Community College. The notes were prepared by Edward Kolbe of the OSU Sea...
Determining the performance characteristics of various ocean wave energy converters (OWEC) has proven to be difficult due to problems replicating a baseline motion profile in the ocean or wave tank to compare these devices. The linear test bed seeks to mechanically simulate the relative linear motion between the active components...
Ocean wave energy is rapidly becoming a field of great interest in the world of renewable energy. Significant advancements in design and technology are being made to make wave energy a viable alternative for our growing energy demands. The two major hurdles for ocean wave energy to make a significant...
With energy prices rising and increasing concern about the influence of fossil fuels on climate change, wave energy systems are on the verge of commercial implementation. These first generation wave energy converters utilize either pneumatics or hydraulics to convert the mechanical energy of waves into electricity. For the last several...
Ocean wave energy is a new and developing field of renewable energy with great potential. The energy contained in one meter of an average wave off the coast of Newport Oregon could supply dozens of homes with electricity. However, ocean waves are usually quite irregular which leads to large bursts...
Switch-mode power supplies (SMPS's) not only convert energy, they also consume it. Typical operational efficiencies are approximately 25 to 60% for linear power supplies, and approximately 50-90% for switching power supplies. This means that products whose end-use electronics are dc, such as televisions and DVD players, could consume 50% less...
In high voltage direct current(HVDC) systems
transmission technology, a.c. power is
converted(rectified) to d.c. power by means of a
controlled rectifier bridge. This d.c. power is then
transmitted through a d.c. link to another
converter(inverter) where it is converted back to a.c.
power by means of another controlled rectifier bridge....
The rapid advancement of electrical science has led it to invade
the field of marine engineering. On ship-board, all ship's lights,
search lights and signal lights are entirely electric. Of power appliances
outside of uses on men of war,ship's ventilation is completely
electric; electric deck winches and boat cranes are...
Accuracy requirements for positioning a vessel in the near shore
area have increased in recent years. To meet these requirements
several electronic positioning systems have been developed. One
such system is the Cubic Autotape Model DM-40. The Autotape is a
circular positioning system which utilizes the phase comparison
between transmitted...