This thesis presents a channelized digital receiver design for UWB sytems in a multipath indoor environment. The UWB technology has been used for commercial and military purposes due to a number of advantages such as low-power consumption, noise-like and carrier free. The energy of UWB signal is spread over a...
Surface acoustic wave (SAW) sensors are versatile devices that can be configured to sense a variety of measurands such as temperature and pressure. The potential use of surface acoustic wave devices for magnetic field detection is explored in this study. Compared to current magnetic field sensors, a sensor based on...
The integration of photodetectors with IC circuits provides a significant
improvement over conventional designs. Featuring noise reduction, extended frequency
responses, lower power consumption, and data operations, these integrated devices open
challenging opportunities for many applications. One type of photodetector has the
potential for important applications in the life science and...
The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
This thesis investigates two methods of optical excitation of alternating-current thin-film electroluminescent (ACTFEL) devices. The two experimental methods investigated in this thesis are the photo-induced charge (PIQ) and luminescence (PIL), and the subthreshold-voltage induced transferred charge (VIQ) techniques. PIQ/PIL experiments utilize an above-bandgap laser pulse to investigate the transport properties...
Amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) constitute the central theme of this thesis. Within this theme, three primary areas of focus are pursued.
The first focus is the realization of a transparent three-stage ring oscillator with buffered output and an output frequency in the megahertz range. This leads to...
The focus of this thesis is the investigation of thin-film transistors (TFTs) based on amorphous oxide semiconductors (AOSs) in two circuit applications. To date, circuits implemented with AOS-based TFTs have been primarily enhancement-enhancement inverters, ring oscillators based on these inverters operating at peak frequencies up to ~400 kHz, and two-transistor...
Diffusion bonding cycle times can be a large cost factor in the production of metal microchannel devices. The challenge is to significantly minimize this cost by reducing the bonding cycle time through rapid and uniform heating and cooling within the bonding process. Heating rates in diffusion bonding processes are typically...