The optical transition in high-fraction polymorphs of titania (TiO2) were investigated to determine the band gap behavior of the most common polymorphs—brookite, rutile, and anatase—the values of which are varied in the literature. The direct optical band gaps of brookite, rutile, and anatase, were determined to be 3.37(7)eV, 3.41(11)eV and...
Microscale continuous thin films or patterned conductive structures find applications in thin film electronics, energy generation and functional sensor systems. An emerging alternative to conventional vacuum based deposition of such structures is the additive deposition and sintering of conductive nanoparticles, to enable low temperature, low- cost and low energy fabrication....
Amorphous metal thin films lack the grain boundaries and dislocations present in
crystalline metal films. As a result, amorphous metal films can be more mechanically robust, atomically smooth, and more resistant to chemical attack than crystalline metals. However, amorphous metals are meta-stable and subject to crystallization upon heating, thus limiting...
Transparent conductive oxides (TCOs), primarily indium doped tin oxide, have been widely used in numerous fields since decades ago, such as solar cells, displays, OLEDs and ‘smart windows’ etc. Owing to the scarcity of indium, there is a great demand for new alternative materials. Metal/insulator/metal (MIM) diodes are a critical...
Magnetic thin films have potential to improve devices such as on-chip inductors, and enable new technologies such as magnetic random access memory (MRAM).
The use of magnetic cores in on-chip inductors is typically limited to applications well under 1 GHz. At higher frequencies, the performance of the magnetic core is...
Polylactic acid (PLA), a renewable material, is used widely in a variety of commercial and specialty applications. However, certain limitations such as high temperature stability and brittleness limit its applicability. This problem is addressed by reinforcing PLA with a variety of materials but the process gives rise to different issues...
The research presented herein represents an effort to combine the ultra-smooth surface of an amorphous metal thin film (AMTF) with a solution-processed dielectric synthesized via prompt inorganic condensation (PIC). Analysis of dielectric film quality is carried out via electrical measurements of metal-insulator-metal (MIM) diodes. Anneals at 500 and 700 °C...
In this thesis the concept of inhomogeneous
dielectrics is demonstrated for various optical coating
applications. Compositionally-varying silicon oxynitride
(SiON) dielectric layers, with the refractive index
varying as a function of position, are grown by computer-controlled
plasma-enhanced chemical vapor deposition
(PECVD) using silane, nitrogen, and nitrous oxide reactant
gases. Compositionally graded...