Measurements on growth traits up to 41 years of age
from 68 progeny sites in eight first-generation breeding
zones of coastal Douglas-fir (Pseudotsuga menziesii
[MIRB.] FRANCO var. menziesii) in the US Pacific Northwest
were used to investigate age trends of genetic parameters
and to determine optimum age of selection. Heritabilities...
The increasing volume of young-growth Douglas-fir timber cut in the Pacific Northwest emphasizes the need for more knowledge on the characteristics of lumber sawed from these trees.
The study described here was initiated to learn the extent arid causes of degrade resulting from kiln-drying young-growth Douglas-fir dimension lumber. At the...
Checking was influenced b drying conditions. This influence was greatest before average moisture content reached 20 per cent, but tension in surface layers caused checking even below this point.
Neither high initial dry-bulb temperature nor initial conditions of high equilibrium moisture content were conducive to checking.
High temperature and high...
High purity niobium metal is used in the construction of superconducting radio frequency (SRF) cavities in superconducting particle accelerators, such as the Large Hadron Collider (LHC) at CERN or the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The usual method for characterizing the impurities in this niobium, the...
Nickel (Ni)-based alloys with a high chromium (Cr) content are frequently employed in applications where elevated temperatures and/or corrosive environments are present due to their excellent corrosion resistance and mechanical properties. However, a gap exists around the formation, and kinetics of long-range order (LRO) Ni2Cr phase in both model binary...
Forced-air drying of lumber is economically feasible as an aid to sawmills without dry kilns. Reduced cost of shipping more than offsets cost of drying with forced circulation of air. Investment in equipment is small.
In the Willamette Valley, forced-air drying probably can be accomplished successfully throughout the year. High...
This work explores the hypothesis that proton irradiation is a feasible alternative to simulate accelerated thermal aging for Ni2Cr long-range ordered phase formation within NiCr and NiCrFe alloys. In this study, various model alloys and commercial alloys 690 and 690+P (0.01 wt.% P) were subject to 2 MeV proton irradiation...
Duplex stainless steels (DSS) are an attractive potential material in nuclear power generation systems due to an excellent combination of corrosion resistance, strength, toughness, and affordability. Thermal embrittlement caused by phase instability in the temperature range of ~300-550°C severely limits the service temperature of DSS. The rate of embrittlement varies...