Competition for the conventional supply of wood residue utilized
by the particleboard industry is increasing. Utilization of low
quality residues by the pulp and paper industry, new sawmill and
plywood recovery techniques, and the growing practice of converting
low quality residues into steam and electrical power have all cut into...
Particleboard is a commodity composite panel made from the residual materials of other wood products manufacturing companies. The industry operates on low profit margins and thus produces high volumes of differing panel grades. Slight inefficiencies over the course of a year can mean a significant loss in profit. Previous calculations...
Particleboard is widely used for making bookshelf, furniture, cabinets and many other interior products. At present, particleboard is mainly produced with wood particles and urea-formaldehyde (UF) resins. The emission of carcinogenic formaldehyde in the production and use of particleboard has generated an urgent need for development of a formaldehyde-free wood...
This research examined the potential for using peanut husk as a fiber alternative to wood in the production of melamine-formaldehyde (MF) particleboard. MF resin was used to produce panels with one, three, six, nine or 12 percent resin contents. Modulus of Rupture (MOR), Modulus of Elasticity (MOE), Internal Bond (IB)...
Formaldehyde-based adhesives such as urea-formaldehyde (UF), phenol-formaldehyde (PF) are widely applied in wood-based composite industry. However, these adhesives are all petrochemical-based and could not sustain in a long term due to a limited reserve of oil and natural gas. Moreover, these adhesives emit carcinogenic formaldehyde in the production or use...
The ability of the resin to deform plastically can be an
important factor when considering the mechanical properties of particleboard.
Between resin droplets there exists an unbonded region
that forms the surface for a crack. When particleboard is deformed
stress concentrations develop at the crack tips in the voids. A...
Particleboard is a widely used composite panel product
consisting of consolidated wood particles and adhesive. On
a macro level the panel appears to be homogeneous, however,
its density varies both throughout the plane of the panel
as well as through its thickness. Of concern for this
thesis is the through-thickness...
Past research has implied that differences in blender performance
between commercial and laboratory particleboard blenders
may not be attributed to resin distribution between screen fractions,
as is commonly believed in the industry today, but to which particles
within a screen fraction have resin and which do note
To test this,...
Effects of stochastic variations of parameters in the planning
and design of a particleboard production system are studied. The
solution obtained from a linear deterministic optimization model is
compared against both the solution derived from the traditional
stochastic programming techniques and the distribution of optimal
objective function values obtained from...
