Index Catalog // ScholarsArchive@OSU

Techniques of working stainless steel in secondary school metal shop

Creator:: Johnson, Robert Severt
Resource Type:: Masters Thesis
Full Text:: Techniques of working stainless steel in secondary school

High temperature fluidized-bed nitridation of 316 stainless steel powder

Creator:: Wang, Tsai-Chen, 1965-
Resource Type:: Dissertation
Full Text:: Fluidized-Bed Nitridation of 316 Stainless Steel Powder Abstract approved: Shoichi Kimura The nitridation

The Release of Nickel from Stainless Steel into Cooked Foods

Creator:: Kamerud, Kristin L.
Abstract:: Toxicological studies show that oral doses of nickel can cause allergic contact dermatitis, and routes of exposure, such as nickel leached from stainless steel cookware are not well characterized. In this study, four variables: grade of stainless steel, cook time, stainless steel seasoning or cooking cycles, and commercial tomato sauces,...
Resource Type:: Undergraduate Thesis and Presentation

Phase Separation in Lean-Grade Duplex Stainless Steel 2101

Creator:: Garfinkel, David A., Poplawsky, Jonathan D., Guo, Wei, Young, George A., and Tucker, Julie D.
Abstract:: The use of duplex stainless steels (DSS) in nuclear power generation systems is limited by thermal instability that leads to embrittlement in the temperature range of 204°C to 538°C. New lean-grade alloys, such as 2101, offer the potential to mitigate these effects. Thermal embrittlement was quantified through impact toughness and...
Resource Type:: Article
Full Text:: Stainless Steel 2101 Phase Separation in Lean-Grade Duplex Stainless Steel 2101 Garfinkel, D. A

Understanding and controlling crevice corrosion in stainless steel : a troublesome problem with marine gear and equipment

Creator:: Kolbe, Edward and Oregon State University. Extension Service/Sea Grant Marine Advisory Program
Resource Type:: Technical Report
Full Text:: construction materials for this Oregon oyster grower— but it was the stainless steel hooks that failed first

Nickel nanoparticles-assisted diffusion brazing of stainless steel 316 for microfluidic applications

Creator:: Tiwari, Santosh K.
Abstract:: Transient liquid-phase diffusion brazing is used in precision, hermetic joining applications as a replacement for diffusion bonding to reduce cycle times, reduce bonding pressure and improve yields. Studies showed that the interlayer used in diffusion brazing can be detrimental due to the use of melting point depressants (MPDs). The goal...
Resource Type:: Dissertation
Full Text:: Stainless Steel 316 for Microfluidic Applications. Abstract approved

Role of Alloying on the Thermal Stability of Duplex Stainless Steel

Creator:: Garfinkel, David
Abstract:: Duplex stainless steels (DSS) are an attractive potential material in nuclear power generation systems due to an excellent combination of corrosion resistance, strength, toughness, and affordability. Thermal embrittlement caused by phase instability in the temperature range of ~300-550°C severely limits the service temperature of DSS. The rate of embrittlement varies...
Resource Type:: Masters Thesis
Full Text:: : Role of Alloying on the Thermal Stability of Duplex Stainless Steel. Abstract approved

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed in 1965. Original report issued December 1959.
Resource Type:: Technical Report
Full Text:: WRINKLING OF THE FACINGS Of ALUMINUM AND STAINLESS STEEL SANDWICH SUIIIECTED IC EDGEWISE COMPRESSION

On the Role of Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel

Creator:: Coe, Hannah G.
Abstract:: Selective laser melting (SLM) is an additive manufacturing (AM) process that uses a laser beam to melt metal powder as it is spread onto the build surface using a roller or scraper, followed by rapid solidification to manufacture a 3D component, one layer at a time. In SLM process, density...
Resource Type:: Masters Thesis
Full Text:: : On the Role of Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel

Corrosion of Carbon and Stainless Steels in H₂O-sCO₂ Environments for Power Cycle Applications

Creator:: Teeter, Lucas
Abstract:: The corrosion behaviors of carbon and stainless steels were investigated in supercritical CO₂ (sCO₂ ) containing H₂O and O₂ simulating conditions that exist in direct sCO₂ power cycle heat exchangers. Thermodynamic properties of CO₂-H₂O-O₂ systems related to the corrosion phenomena were determined using NIST software. The exposure tests of the...
Resource Type:: Masters Thesis
Full Text:: . The corrosion behavior of X65 carbon steel and both 347H and 316 stainless steels was investi- gated

ScholarsArchive@OSU

Techniques of working stainless steel in secondary school metal shop

High temperature fluidized-bed nitridation of 316 stainless steel powder

The Release of Nickel from Stainless Steel into Cooked Foods

Phase Separation in Lean-Grade Duplex Stainless Steel 2101

Understanding and controlling crevice corrosion in stainless steel : a troublesome problem with marine gear and equipment

Nickel nanoparticles-assisted diffusion brazing of stainless steel 316 for microfluidic applications

Role of Alloying on the Thermal Stability of Duplex Stainless Steel

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

On the Role of Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel

Corrosion of Carbon and Stainless Steels in H₂O-sCO₂ Environments for Power Cycle Applications

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Conference Section/Track

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Funding Body

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search