Index Catalog // ScholarsArchive@OSU

Creator:: Stubkjaer, William Lloyd
Abstract:: A set of circuit analysis programs designed for the IBM 1620 computer (having 40,000 digits of memory) is described and its operation is explained. The set consists of d-c, a-c, and transient analysis programs. The d-c and a-c analysis programs provide the branch current and node-to-reference potential for linear circuits....
Resource Type:: Masters Thesis
Full Text:: A linear circuit analysis program for a small computer

Creator:: Heuch, Knut
Abstract:: A system consisting of two d-c generators, one exiting the other, is controlled with an EAI 690 hybrid computer in an on-line operation. The hybrid computer works as a predictive controller with an on-off actuating signal. A fast-time, second-order model is used to determine the switching time, and a small...
Resource Type:: Masters Thesis
Full Text:: Computer 39 APPENDIX III. Additional Circuitry 41 APPENDIX IV, The Digital Program which Implements the

Creator:: Heberle, David D.
Abstract:: A project funded by the Southern California Edison (SCE) Company, Research Center of Irwindale, California, has supported the development of a performance and parameter prediction software program for use during the refurbishment of large synchronous machines, turbine generators, and synchronous condensers. The computer program was developed for SCE to allow...
Resource Type:: Masters Thesis
Full Text:: synchronous condensers. The computer program was developed for SCE to allow user friendly input of a

Creator:: Hayward, Roger D.
Abstract:: Delta-Sigma Modulator-based Analog-to-Digital converter design is an active area of research. New topologies require extensive simulations to verify their performance. A series of improvements were made to an existing circuit simulation package in order to speed the simulation process for the designer. Various examples of these improvements are presented in...
Resource Type:: Masters Thesis
Full Text:: preparing a computer program to emulate the circuit topology. Although this certainly can provide results

Creator:: Nehrir, Mohammad Hashem
Abstract:: Real-time predictive voltage control of a direct-current (d-c) generating system is achieved with the aid of a hybrid computer. Some assumptions were required to adequately simplify the simulation of the d-c generating system. A predictive controller is used to maintain the load voltage of the d-c generating system (the controlled...
Resource Type:: Masters Thesis
Full Text:: ) The parameters X and Y , and also E and F are constants, and a part of the computer program input

Creator:: Davidson, James D. (James Douglas), 1960-
Abstract:: Alternating-current thin-film electroluminescent (ACTFEL) devices are metal-insulator-semiconductorinsulator- metal (MISIM) structures which emit light under high field, pulsed excitation. One aspect of ACTFEL operation that is not well understood is the aging of such devices with operating time. One of the primary goals of this thesis is to characterize the kinetics...
Resource Type:: Masters Thesis

Creator:: Bhowmik, Shibashis
Abstract:: The advent of superior power semiconductor devices and converter topologies has renewed interest in ac drive systems. Although considerable research efforts have gone into improving power electronic converter devices and topologies, very little has been reported on the overall performance optimization of induction machine drive systems. The report of the...
Resource Type:: Masters Thesis
Full Text:: Bhowmik for the degree of Master of Science in Electrical and Computer Engineering presented on

Creator:: Thompson, Brenda E.
Abstract:: Brushless Doubly Fed Machines (BDFM) have potential advantages in variable speed generation and adjustable speed drive applications. The most significant of these advantages is a reduction in the power electronic converter rating, and therefore a reduction in overall system cost. Presently, efforts are being directed at optimizing the design of...
Resource Type:: Masters Thesis
Full Text:: , representing Electrical and Computer Engineering Chair of Department of Electric 1 and Computer Engineering

ScholarsArchive@OSU