The corrosion behaviors of carbon and stainless steels were investigated in supercritical CO₂ (sCO₂ ) containing H₂O and O₂ simulating conditions that exist in direct sCO₂ power cycle heat exchangers. Thermodynamic properties of CO₂-H₂O-O₂ systems related to the corrosion phenomena were determined using NIST software. The exposure tests of the...
Various antifoulant treatment programs and the
considerations necessary for the effective use of such
programs were examined.
Two different groups of tests, with and without
iron contamination, have been carried out on the
effectiveness of several of the state-of-the-art
copolymers (PA, HEDP, AA/HPA, AA/MA, SS/MA and AA/SA) in
the inhibition...
The fouling characteristics of cooling tower water
containing various corrosion inhibitors and other additives
on heat transfer surface have been investigated. Corrosion
inhibitors investigated included zinc-chromate and
phosphates. In addition, additives including polyacrylate
and phosphonate (HEDP and AMP) were used to determine their
effectiveness as antifoulants.
The tests were conducted...
The feasibility of fluidized bed combustion of coal for commercial
and industrial steam power generation has been established
and reported in the literature. Satisfactory removal of sulfur
oxides from the combustion product gases has also been reported.
In this experiment various heat exchanger tube patterns,
of commercial size tubes, were...
The object of this research, project was to study how
different parameters effect the magnitude and frequency
composition of forces exerted on simulated heat exchange
tubes immersed in a cold fluidized bed. Two arrays of
tubes were assembled with the tubes mounted in an
equilateral triangular pitch pattern. The center...
The object of this research study is to investigate and provide
some fundamental information about bed slumping in a partially defluidized
bed combustor. Due to the difficulty in making measurements and
observations at high temperature, a dynamically similar cold phase
fluidized bed was used to model the high temperature case....