Index Catalog // ScholarsArchive@OSU

Potentialities of paper-base laminates as compared with other laminates

Creator:: Stamm, Alfred J. (Alfred Joaquim), 1897- and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: referring to one o f the molded plywood airplanes . Resin treated laminated woods in both th e uncompressed

Residual strength properties of Gr/BMI composite laminates after constant/cyclic compression

Creator:: Shenoy, Krishnananda
Resource Type:: Masters Thesis
Full Text:: Strength Parameters 8 2.2 General Purpose Laminate Program - Gen lam 12 3. Component Material Properties

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: experimental results obtained from compression testing of graphite/thermoplastic laminates with the same ply

Strength and related properties of Forest Products Laboratory laminated paper plastic (papreg) at normal temperature

Creator:: Erickson, E. C. O., Boller, Kenneth H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, June 1959.
Resource Type:: Technical Report
Full Text:: parallel-laminated and cross- laminated material in the two principal directions, lengthwise and crosswise

Laminated, bolted, and solid keels for 50-foot Navy motor launch compared for strength

Creator:: Luxford, R. F. (Ronald Floyd), 1889-, Krone, Robert H., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: investigation to compare the strength properties of laminated, bolted, and solid keels. Description of Material

Laminated oak frames for a 50-foot navy motor launch compared to steam-bent frames

Creator:: Luxford, R. F. (Ronald Floyd), 1889-, Krone, Robert H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956 and 1962.
Resource Type:: Technical Report
Full Text:: supply of material. The usual practice in fabricating laminated products is to bend and glue the

Development of a counterpart vertical fin of papreg for the AT-6 airplane

Creator:: Forest Products Laboratory (U.S.) and Jungmann, E. C.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: Products Laboratory of papreg,? a laminated paper plastic of high tensile strength, during World War II led

Stress-rupture tests of a glass-fabric-base plastic laminate

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1959. Original report issued June 1953.
Resource Type:: Technical Report
Full Text:: fabric, number 181-114, parallel-laminated with a polyester laminating resin (resin 2) of the alkyd

Supplement to bolt-bearing properties of glass-fabric-base plastic laminates

Creator:: Youngs, R. L. (Robert Leland), 1924- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued October 1955.
Resource Type:: Technical Report
Full Text:: in cases where the values are probably so close as to be within the limits of material and testing

Strength losses of papreg due to bag-molding defects

Creator:: Turner, Harold Dale, Jungmann, E. C., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: the defects were in the region where the bending moment in testing i s the greatest . Emery cloth' was

ScholarsArchive@OSU

Potentialities of paper-base laminates as compared with other laminates

Residual strength properties of Gr/BMI composite laminates after constant/cyclic compression

A study of compression loading of composite laminates

Strength and related properties of Forest Products Laboratory laminated paper plastic (papreg) at normal temperature

Laminated, bolted, and solid keels for 50-foot Navy motor launch compared for strength

Laminated oak frames for a 50-foot navy motor launch compared to steam-bent frames

Development of a counterpart vertical fin of papreg for the AT-6 airplane

Stress-rupture tests of a glass-fabric-base plastic laminate

Supplement to bolt-bearing properties of glass-fabric-base plastic laminates

Strength losses of papreg due to bag-molding defects

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search