Index Catalog // ScholarsArchive@OSU

Moisture excluding effectiveness and weight of aircraft finishes on papreg and on plywood

Creator:: Browne, F. L. (Frederick Lincoln), 1895-, Schwebs, A. C., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: the finishing charac- teristics of papreg, the laminated paper plastic developed at the Forest

Preparation of lignin-filled paper for laminated plastics

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revised September 1957. Original report was dated August 1943.
Resource Type:: Technical Report
Full Text:: Forest Servic e U . S. Department of Agricultur e Introduction Methods of making a laminated plastic

Effect of defects on the tensile and compressive properties of a glass-fabric-base plastic laminate

Creator:: Forest Products Laboratory (U.S.), Werren, Fred, and Heebink, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed March 1955 and 1960. Results here reported were obtained during 1950.
Resource Type:: Technical Report
Full Text:: CIF A GLASS-FABRIC-BASF PLASTIC LAMINATE Information 12cvietuec I Peaffirr March 1955 INFO This

Tensile stress-rupture and creep characteristics of two glass-fabric-base plastic laminates

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1965. Original report issued June 1957.
Resource Type:: Technical Report
Full Text:: -FABRIC-BASE PLASTIC LAMINATES No. 1863 June 1937 INFORMAT!fl9 RFV1EWED' AND REAFFiRMED 1965 This

Effect of different catalysts and amounts of styrene monomer on strength and durability of glass-cloth plastic laminates

Creator:: Forest Products Laboratory (U.S.), Mohaupt, Alvin A., and Freas, Alan D'Yarmett, 1910-
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued March 1952.
Resource Type:: Technical Report
Full Text:: AMOUNTS OF STYRENE MONMER ON STRENGTH AND DURABILITY OF GLASS-CLOTH PLASTIC LAMINATES1 By A. A

Supplement to effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Creator:: Werren, Fred and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report
Full Text:: ON Tilt MECI-IANICAL PROPERTIES OF TWO GLASS-FABRIC-BASE PLASTIC LAMINATES June 1951 INFORMATION

Effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Werren, Fred
Abstract:: Information reviewed and reaffirmed April 1957
Resource Type:: Technical Report
Full Text:: -base plastic laminates. The laminated speci- mens were prestressed to various percentages of the

Effect of span-depth ratio and thickness on the mechanical properties of a typical glass-fabric-base plastic laminate as determined by bending tests

Creator:: Forest Products Laboratory (U.S.) and Werren, Fred
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed July 1955 and 1960.
Resource Type:: Technical Report
Full Text:: PROPERTIES CF A TYPICAL GLASS-FABRIC-BASE PLASTIC LAMINATE AS DETERMINED BY BENDING TESTS -Infermatiert

Certain properties of papreg affected by wet-press pressure on Mitscherlich base paper

Creator:: Forest Products Laboratory (U.S.), Mackin, G. E., Seidl, Robert J., and Baird, Parker K.
Abstract:: This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: pressures on certain properties of the laminated plastic. Variations in wet-press pressure affect the

Factors affecting the strength of papreg : Effect of moisture on certain strength properties of papreg

Creator:: Forest Products Laboratory (U.S.), Meyer, H. R., and Erickson, E. C. O.
Abstract:: Information reviewed and reaffirmed March 1956 and 1962. Original report published 1945.
Resource Type:: Technical Report
Full Text:: properties of both parallel- and cross-laminated papreg, 1/8 inch in thickness. In general, a decrease in

ScholarsArchive@OSU

Moisture excluding effectiveness and weight of aircraft finishes on papreg and on plywood

Preparation of lignin-filled paper for laminated plastics

Effect of defects on the tensile and compressive properties of a glass-fabric-base plastic laminate

Tensile stress-rupture and creep characteristics of two glass-fabric-base plastic laminates

Effect of different catalysts and amounts of styrene monomer on strength and durability of glass-cloth plastic laminates

Supplement to effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Effect of prestressing in tension or compression on the mechanical properties of two glass-fabric-base plastic laminates

Effect of span-depth ratio and thickness on the mechanical properties of a typical glass-fabric-base plastic laminate as determined by bending tests

Certain properties of papreg affected by wet-press pressure on Mitscherlich base paper

Factors affecting the strength of papreg : Effect of moisture on certain strength properties of papreg

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search