Index Catalog // ScholarsArchive@OSU

Developing Design Model for Cellulose Nanocomposites

Creator:: Shir Mohammadi, Meisam
Abstract:: Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...
Resource Type:: Dissertation
Full Text:: because the nanocomposite community lacks decent analytical model that can provide reliable prediction

Flat plates of plywood under uniform or concentrated loads

Creator:: March, H. W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued to aid the nation's war program. Information reviewed and reaffirmed 1956 and 1962. Report first issued March 1942.
Resource Type:: Technical Report

Summary of formulas for flat plates of plywood under uniform or concentrated loads

Creator:: March, H. W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1959. Date of original report February 13, 1942.
Resource Type:: Technical Report

Study of Interphase in Polylactic Acid and Cellulose Nanocrystal Composite Films

Creator:: Rao, Pratish Ramesh
Abstract:: Polylactic acid (PLA), a renewable material, is used widely in a variety of commercial and specialty applications. However, certain limitations such as high temperature stability and brittleness limit its applicability. This problem is addressed by reinforcing PLA with a variety of materials but the process gives rise to different issues...
Resource Type:: Masters Thesis
Full Text:: . Table 1-1-1: Table comparing some mechanical properties of common fillers [2] Material Density (g

Three-dimensional, nonlinear viscoelastic analysis of laminated composites : a finite element approach

Creator:: Wang, Min
Abstract:: Polymeric composites exhibit time-dependent behavior, which raises a concern about their long term durability and leads to a viscoelastic study of these materials. Linear viscoelastic analysis has been found to be inadequate because many polymers exhibit nonlinear viscoelastic behavior. Classical laminate theory is commonly used in the study of laminated...
Resource Type:: Dissertation
Full Text:: Geometry Data 116 A.3 Constraint Data 118 A.4 Real Constant and Material Property Data 119 A.5 Load Data

Effect of thickness on strength of glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1959. Original report issued May 1954.
Resource Type:: Technical Report
Full Text:: core. The compressive strength of these facings, tested independently of the core material, was only

Supplement to effects of shear deformation in the core of a flat rectangular sandwich panel : deflection under uniform load of sandwich panels having facings of moderate thickness

Creator:: Ericksen, Wilhelm S. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original dated December 1951.
Resource Type:: Technical Report
Full Text:: Agriculture Introduction This report supplements the mathematical analysis of the deflection of a simply

Supplement to effects of shear deformation in the core of a flat rectangular sandwich panel : deflection under uniform load of sandwich panels having facings of unequal thickness

Creator:: Ericksen, Wilhelm S. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1962.
Resource Type:: Technical Report
Full Text:: . The material in the two facings is considered the same and similarly oriented . The dimensions of the

Determination of mechanical properties of adhesives for use in the design of bonded joints

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued January 1956.
Resource Type:: Technical Report
Full Text:: DETERMINATION CIF MECHANICAL PROPERTIES or ADHESIVES FOR USE IN

Tensile properties of glass-fabric laminates with laminations oriented in any way

Creator:: Erickson, E. C. O., Norris, Charles, B. (Charles Brazer), 1894-, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued November 1955.
Resource Type:: Technical Report
Full Text:: mathematical analysis of the elastic properties of glass-fabric-base laminates in the plane of the laminate is

ScholarsArchive@OSU

Developing Design Model for Cellulose Nanocomposites

Flat plates of plywood under uniform or concentrated loads

Summary of formulas for flat plates of plywood under uniform or concentrated loads

Study of Interphase in Polylactic Acid and Cellulose Nanocrystal Composite Films

Three-dimensional, nonlinear viscoelastic analysis of laminated composites : a finite element approach

Effect of thickness on strength of glass-fabric-base plastic laminates

Supplement to effects of shear deformation in the core of a flat rectangular sandwich panel : deflection under uniform load of sandwich panels having facings of moderate thickness

Supplement to effects of shear deformation in the core of a flat rectangular sandwich panel : deflection under uniform load of sandwich panels having facings of unequal thickness

Determination of mechanical properties of adhesives for use in the design of bonded joints

Tensile properties of glass-fabric laminates with laminations oriented in any way

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search