An optical diagnostic system capable of measuring angular displacements in a torsionally loaded shaft through noncontact means has been developed. Conventional
torsion diagnostic mechanisms must come in contact with the shaft to be analyzed. The signal-to-noise ratio response of conventional systems is compromised by dirt and wear. Another consequence of...
Longshore currents are frequently occurring phenomena capable of transporting beach sediments, causing accretion and erosion of the shoreline. Forcing mechanisms are understood and well modeled for cases of alongshore homogeneous and monotonic bathymetry, yet the extension of these models to complex and irregular bathymetry sometimes fails. To test and improve...
A fiber optic fluorometer utilizing a double-fiber optic probe
was constructed. The absolute fluorescence signal and effective
collection efficiency are approximately one fifth those of typical
cuvette fluorometers and agree with those predicted by theory. A
quinine sulfate calibration curve shows linearity from a detection
limit of 10 pg/mL to...
Fiber Bragg grating sensors have been constantly researched for the last ten years and have finally begun to find use in the commercial market. However, one of the major factors limiting their widespread use is their system cost. Their lightweight, flexibility, electromagnetic immunity, and small size make fiber Bragg grating...
We demonstrated a sensitive biosensor based on plasmonic metal composite nanostructures. The device can be fabricated and duplicated with ease using a novel nanoprinting technology which allows precise transfer of metal nanostructures without complicated lithography processes. The design featured by its unique material composition and sub-wavelength structures maximizes the exposure...
Polymer electrolyte membrane (PEM) fuel cells are being studied for use as high efficiency power plants in alternative fuel vehicles. To maintain high efficiency the operating temperatures of the membranes in these fuel cells must be closely monitored and controlled. However, the environment inside of the fuel cell is not...
Mercury cadmium telluride is important in the detection
of electromagnetic radiation in the eight to twelve micron
atmospheric window for infrared imaging systems. High
resolution infrared imaging systems use either large (256x256
element to 1024x1024 element) staring arrays or much smaller
(1-6 element) scanned arrays in which the image is...