Empirical algorithms for the total absorption coefficient and absorption
coefficient by pigments for surface waters at 440 nm were developed by applying a quadratic formula that combines two spectral ratios of remote-sensing reflectance. For
total absorption coefficients ranging from 0.02 to 2.0 m⁻¹, a goodness of fit was achieved
between...
Several simple laboratory experiments have been conducted to study the dynamic behavior of the vector-averaging current meter (VACM) compass and vane follower. They demonstrate that the behavior of the compass and vane follower can be modeled as a damped linear harmonic oscillator for small-amplitude forcing. The combined eddy-current and bearing-friction...
Optical variability occurs in the near-surface and upper ocean on very short time and space scales (e.g., milliseconds and millimeters and less) as well as greater scales. This variability is caused by solar, meteorological, and other physical forcing as well as biological and chemical processes that affect optical properties and...
Two-dimensional, primitive equation model studies of wind-forced flow over a continental shelf Show that, under upwelling conditions, high levels of near-inertial wave energy are found in the interior over the shelf. The regions of elevated wave energy, with maximum wave amplitudes of around ±0.2 m s⁻¹, persist for up to...
Sixty-day simulations of flow on the Oregon continental shelf are performed using the Blumberg and Mellor sigma coordinate, primitive equation model. The model is two-dimensional (an across-shelf section) with high spatial resolution and realistic shelf topography. Forcing consists of surface heat flux, either hourly or low-pass filtered wind stress, and...
Nickel (Ni)-based alloys with a high chromium (Cr) content are frequently employed in applications where elevated temperatures and/or corrosive environments are present due to their excellent corrosion resistance and mechanical properties. However, a gap exists around the formation, and kinetics of long-range order (LRO) Ni2Cr phase in both model binary...
Adhesive use is becoming increasingly common in manufacturing processes. The advantage of adhesives are light weight components, non-destructive fastening techniques and distribution of loads over the applied bond region. Modeling the behavior of adhesive bond lines in fastening joints can help in the design process to make an optimized joint,...
The overall goal of the Greater Sage-grouse Comprehensive Conservation Strategy (Strategy) is to maintain and enhance populations and distribution of sagegrouse by protecting and improving sagebrush habitats and ecosystems that sustain these populations. This Strategy outlines the critical need to develop the associations among local, state, provincial, tribal, and federal...
Efficacious vaccines were developed for the control of Vibrio
anguillarum, the etiological agent of vibriosis in salmonid fish.
These bacterins can be administered either orally or parenterally.
It was determined that both formalin-killed lyophilized whole cells
and wet-packed whole cells of the organism are effective oral immunogens.
Intraperitoneal injection of...
This work examines the varied populations which have inhabited the South Fork region from prehistoric times to the present.
It disclosed that even though almost no archaeology has been done
in the area, data from contiguous regions suggest that persistent
and careful archaeological investigation should reveal valuable
and informative sites...