Index Catalog // ScholarsArchive@OSU

The problem : to determine the moisture content of boards in a piled load of lumber before take down

Creator:: Martin, Leo and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: determine the moisture content of boards in a piled load of lumber before take down. The Answer: Use a

Measuring moisture content above fiber saturation

Creator:: Heimerdinger, Uli, Western Dry Kiln Association, and Western Dry Kiln Association. Meeting (45th : 1994 : Vancouver, B.C.)
Resource Type:: Conference Proceeding
Full Text:: content in the kiln for moisture content-controlled schedules. Figure 3 is an example of such a schedule

Coniferous forest streams

Creator:: Triska, F. J., Sedell, J. R., and Gregory, S. V.
Abstract:: p.292-332 from Analysis of coniferous forest ecosystems in the Western United States.
Resource Type:: Part of Book
Full Text:: Foundation. Volume I MAN IN THE ANDES: A Multidisciplinary Study of High-Altitude Quechua/Pau/ T Baker and

Study of temperature and moisture content in wood aircraft wings in different climates

Creator:: Browne, F. L. (Frederick Lincoln), 1895-, Downs, Leslie E., Laughnan, Don F., Schwebs, A. C., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: to zero-moisture content in the middle of hot days; at Madison the lowest moisture content observed

Lumber moisture content and temperature as a basis for control of kiln conditions

Creator:: Holmes, Stewart, Western Dry Kiln Association, and Western Dry Kiln Association. Meeting (39th : 1988 : Reno, Nev.)
Resource Type:: Conference Proceeding
Full Text:: increasing air temperature the moisture in lumber will tend to move out of the lumber at a greater rate. As

Moisture content - strength relationship for lumber subjected to bending

Creator:: Madsen, Borg, Western Dry Kiln Clubs, and Western Dry Kiln Clubs. Meeting (27th : 1976)
Resource Type:: Conference Proceeding
Full Text:: lumber to predetermine moisture content levels before testing. This has, in the past, been quite time

Evaluation of the torsion test as a method to determine the shear strength of structural composite lumber

Creator:: Siller, Tobias Stefan
Abstract:: Torsion test was evaluated as a method to determine the shear strength parallel to grain of full-size structural composite lumber (SCL). Experimental results of eighty-five rectangular (44 x 140 mm²) specimens were verified by finite element analysis. Laminated strand lumber (LSL), laminated veneer lumber (LVL) and parallel strand lumber (PSL)...
Resource Type:: Masters Thesis
Full Text:: TEST AS A METHOD TO DETERMINE THE SHEAR STRENGTH OF STRUCTURAL COMPOSITE LUMBER. Abstract approved

The impact of wood variability on the drying rate at different moisture content levels

Creator:: Berberović, Adin
Abstract:: Variability in wood properties causes boards within a stack of lumber to dry at different rates and reach different moisture content levels after drying is completed. The consequence is that the boards will have properties that differ from ones that were intended to be achieved by the drying process. The...
Resource Type:: Dissertation
Full Text:: R. Milota Variability in wood properties causes boards within a stack of lumber to dry at

Control of moisture content in special drying processes

Creator:: Anderson, Arthur B., Western Dry Kiln Clubs, and Western Dry Kiln Clubs. Meeting (8th : 1956 : Berkeley, Calif.)
Resource Type:: Conference Proceeding
Full Text:: to fill it. The lumber with chemical is piled in alternate layers using from 60 to 100 lbs. of

One hundred percent check of moisture content in dry lumber

Creator:: Grist, Joe, Western Dry Kiln Clubs, and Western Dry Kiln Clubs. Meeting (8th : 1956 : Berkeley, Calif.)
Resource Type:: Conference Proceeding
Full Text:: planer splits. We then made a series of tests to determine the moisture content limit to which the

ScholarsArchive@OSU

The problem : to determine the moisture content of boards in a piled load of lumber before take down

Measuring moisture content above fiber saturation

Coniferous forest streams

Study of temperature and moisture content in wood aircraft wings in different climates

Lumber moisture content and temperature as a basis for control of kiln conditions

Moisture content - strength relationship for lumber subjected to bending

Evaluation of the torsion test as a method to determine the shear strength of structural composite lumber

The impact of wood variability on the drying rate at different moisture content levels

Control of moisture content in special drying processes

One hundred percent check of moisture content in dry lumber

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search